An Investigation on the Effects of Vibrations Applied to the Machining Tank on Geometric Wear of Tool Electrode in Electrical Discharge Machining
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2018, Vol 6, Issue 2
Abstract
In this study, experiments are conducted with different machining conditions such as vibration frequency, discharge current and pulse duration to investigate the effects of vibrations applied to the machining tank on geometric corner wear of tool electrode and performance outputs in Electrical Discharge Machining. Tool wear rate (TWR) and relative wear (RW) are dropped at experiments with machining tank vibration (MTV-EDM), when compared to experiments without vibrations. According to the results of experiments, vibrations applied to the machining tank have caused a decrease in the values of electrode corner radius.
Authors and Affiliations
Ali ÖZGEDİK, Sadık Mert BALCI, Muhammed Emin ERDİN, Yağmur KOPRAMAN
Keywords
Related Articles
- EP ID EP489848
- DOI 10.29109/http-gujsc-gazi-edu-tr.346354
- Views 99
- Downloads 0
Enrichment of 8-125 mm Colemanite Ores via NIR/CCD Optical Sorter
In this study, 8-125 mm Simav Ana Damar (SAD), Simav Tali Damar (STD) and Tülü Sarı (TS) raw colemanite ores which extracted together with the minerals such as clay, tuff, limestone from the quarries of Bigadiç Boron Wor...
Filtration of Harmonic Components and Correction Power Factor in Nonlinear Loads
Total harmonic distortion has become an important subject in power quality, especially afteruse of power electronicequipment and non-linear loads. Working of electricity systems smoothly and safety depends on the foundat...
Energy Saving in Industrial Annealing Furnaces
In this study, an energy efficiency studies have been carried out in a natural gas-fired rolling mill annealing furnace of an industrial establishment. In this context, exhaust gas from the furnace has been examined in t...
Real-time monitoring of medical data via GPRS
In this study, an embedded real time system was designed for the mobile phone to telemonitoring and checking the status of patients. The ECG, Oxygen Saturation in arterial blood and blood pressure signals were transferre...
Polyurethane Production from Waste Bale Fibers
Nowadays, the methods of eliminating the pollution from wastes of the materials produced as much as the production methods are important. This requires efficiently use of sources economically and ecologically. Polyester...