INFLUENCE OF THE CONCENTRATION OF SMALL-WATER WATER ON THE MECHANISM OF CORROSIVE-MECHANICAL WEARING OF HYDRAULIC ENGINEERING OF VEHICLES
Journal Title: Збірник наукових праць Українського державного університету залізничного транспорту - Year 2018, Vol 178, Issue 12
Abstract
The use of a hydraulic drive has several advantages over electric drive: relatively less weight, simplicity in operation. However, the operation of hydraulic drives has its own characteristics. An important factor in the operation of the hydraulic drive is the temperature difference at the boundary of the working body and atmospheric air, which leads to the formation of condensed water. Water can get into the hydrosystem and another way. The concentration of water in the hydraulic system of vehicles may reach 1% by volume. Water in oil leads to a number of negative consequences. These include oxidation of the oil and metal surfaces of the hydraulic drive elements, increased emulsibility, increased risk of formation of cavitation zones, increase of oxidative and hydrogen wear of parts of the hydraulic drive. The influence of water on the wear of parts of the hydraulic drive vehicles always remains an urgent problem. Such wear is called corrosion-mechanical wear. The reason for the corrosion processes is the high activity of metals in comparison with hydrogen. The process of corrosion-mechanical wear is considered in the work and the calculation of wear is presented. The calculation of wear is shown on the example axial-piston pump. The calculation method includes both the basic geometric parameters of the axial-piston pump and the properties of the metallic surfaces. The distance to which the field of the metal surface acts is determined. At the same time, a system of equations was created for the energy of the thermal motion and the energy of the metal surface. Theoretical calculation results were confirmed by experimental research. The experiment was a study on a stationary friction machine. The friction pair was a shaft and a roller. The main parameters of the experiment were chosen: load, slip speed, slipping path, temperature of the lubricant. The main variable parameter was the concentration of water. The investigated values ranged from 0.0 to 1.0% water. According to the results of the study, wear decreases with acceleration at a uniform growth of water concentration.
Authors and Affiliations
Sergey Voronin, Oleksii Skoryk
Keywords
Related Articles
- EP ID EP396560
- DOI 10.18664/1994-7852. 178.2018.139471
- Views 33
- Downloads 0
PROBABILISTIC RELIABILITY ASSESSMENT OF GATE CHAMBERS ON ROCK FOUNDATION BY THE CRITERIA OF STRENGTH, OVERTURNING AND STABILITY AGAINST DISPLACEMENT OF THE GATE CHAMBERS ON THE EXAMPLE OF HYDRO SCHEMES OF THE DNIEPER CASCADE
This work further develops the method for assessing reliability of gate chambers by the criteria of stability loss against displacement and overturning, as well as floating up. The work considers the random nature of the...
ANALYSIS OF THE CONDITION OF RAILS DURING OPERATION
The causes of the failure of rails, the defects that are emerge consequently and their location are considered in the article. The distribution of the decarburized layer along the perimeter and length of the rail is inve...
INFLUENCE OF SLAGS OF BOILERS WITH CIRCULATING FLUIDIZED BED ON FROST RESISTANCE OF CONCRETE
The results of the study of the influence of slags of boilers with a circulating fluidized bed on the frost resistance of heavy concrete are presented. In the studies was used fallowing materials: Portland cement PC I-50...
METHOD FOR CALCULATING REINFABRICATED REINFORCED CONCRETE LINING OF A PRESSURE HYDRAULIC TUNNEL
The analysis of structural features and operating conditions of the prefabricated reinforced concrete lining of a pressure hydraulic tunnel was carried out. The requirements to be met by the elements of the lining in que...
DEFINITION OF CHARACTERISTICS OF STOCKS OF SPARE PARTS FOR MAINTENANCE OF THE MAINTENANCE OF DIESEL LOCOMOTIVES
In clause questions of formation of stocks of spare parts for service of diesel locomotives which allow estimating qualitatively their level from the point of view of the theory of mass service are considered. On the bas...