Measurement and Data Processing System for Welding Parameters and Noise Level during Manufacturing Process of Welded Structures
Journal Title: Biuletyn Instytutu Spawalnictwa - Year 2016, Vol 60, Issue 5
Abstract
This paper presents the design, technical possibilities and the intended use of a multi-station measurement system for assessing welding process parameters and noise levels. The system is an innovative solution as regards the measurement technique related to welding process parameters and acoustic pressure in production floors. Once implemented industrially, the system enables the monitoring and recording of noise levels in individual work centres as well as the monitoring and recording of technological conditions accompanying the welding of various structures and products.
Authors and Affiliations
Leszek Szubert, Piotr Skoczewski, Jolanta Matusiak, Joanna Wyciślik
Keywords
Related Articles
- EP ID EP257626
- DOI 10.17729/ebis.2016.5/23
- Views 43
- Downloads 0
Results of Non-Destructive and Destructive Tests of Welded Joints Made of Heat-Resistant Cast Steel GX40NiCrSiNb35-25 in Welding Procedure Qualification
The article presents test results concerning the welding procedure qualification of the production welding of heat-resistant cast steel GX40NiCrSiNb35-25 (1.4852) performed using filler metal WZ 25 35 Zr according to PN-...
Development of Methods for the Assessment of Stresses in Welded Structure Elements. Part 2. The Latest Methods
Disadvantages of traditional methods for the determination of stresses in stress concentration zones of welded joints discussed in the first part of this overview required to be classified and inspired the development of...
Use of Plasma Method Variants When Welding Sheets Made of Steel X6CrNi18-10
The article presents the course and results of tests aimed to identify the effect of the PAW (plasma welding) method variant (with cold wire and without the filler metal) or PPAW method (flux-cored) on the shape of the w...
Effect of High Humidity and Neutral Salt Mist on the Fatigue Service Life of T-Joints
The article concerns the experimental testing of the long-lasting effect of surrounding environmental conditions (high air humidity and neutral salt mist) on the characteristics of the fatigue service life of T-joints in...
Nd-YAG Laser Beam-Induced Liquation Cracking in Selected Nickel-Based Superalloys
MAR-M247 and Rene 77 belong to intermetallic phase Ni₃(Al, Ti) precipitation hardened nickel alloys widely used in the aerospace and power engineering industries. Because of their susceptibility to cracking, the above-na...