MEMRISTOR EMULATOR USING MCP3208 AND DIGITAL POTENTIOMETER
Journal Title: ICTACT Journal on Microelectronics - Year 2018, Vol 3, Issue 4
Abstract
In this paper, we are using memristor emulator made up of a Digital Potentiometer (DigPot) and microcontroller (Arduino). Mostly the emulator is composed of off-the-shelf electronic component. Here we are using MCP3208 microchip. The Arduino which in turn communicates with the digital potentiometer through the Serial Peripheral Interface (SPI). The analog pin in the Arduino is used to read the voltages at terminals of digital potentiometer resistance network. It is built as an Analog to Digital Converter (ADC) on the Arduino. Then the resistance value calculated by using mathematical equation of the memristor. It continuously updates the potentiometer through the serial port based on the calculation of microcontroller. The data is collected through the serial port and displayed on the LCD screen. This can be simulated by using Xilinx ISE software.
Authors and Affiliations
Abarna Ermini M
Keywords
Related Articles
- EP ID EP535151
- DOI 10.21917/ijme.2017.0084
- Views 137
- Downloads 0
SIMULATED ANNEALING ALGORITHM FOR MODERN VLSI FLOORPLANNING PROBLEM
In floorplanning, our aim is to determine the relative locations of the blocks in the chip and the objective is to minimize the floorplan area, wirelength. Generally, there are so many strategies in VLSI floorplanning li...
ANALYSIS OF STATIC NOISE MARGIN FOR NOVEL POWER GATED SRAM
Data stability is one of the important parameter of SRAM with scaling of CMOS technology. However the move to nanometer technology not only nodes has increased, but the variability in device characteristics has also incr...
DESIGN AND ANALYSIS OF MICROSTRIP PATCH ARRAY ANTENNA FOR WLAN APPLICATIONS
In this paper, a rectangular slotted microstrip patch array antenna is proposed and designed for wireless local area network applications. A single patch, 1x2, 1x4 and 1x8 patch array antenna is designed and the impacts...
FPGA IMPLEMENTATION OF A PSEUDO NOISE SEQUENCE USING CHAOTIC TENT MAP FOR SATELLITE COMMUNICATION
Pseudo Noise (PN) sequences are an integral part of satellite navigation system. In the past few years’ modernization of these systems had led to the addition of new frequency signals or bands such as the L1c and L5 sign...
DFAL BASED FLEXIBLE MULTI-MODULO PRESCALER
The quest to have longer battery life and reduced packaging cost has been motivating factor behind developing low power circuits for different applications. Research in adiabatic logic has recently gained momentum and di...