Methods of Protection of National Architecture Monuments
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2013, Vol 36, Issue 1
Abstract
The paper discusses the problem of monuments conservation in terms of technical implementation and based on the importance of conservation of historical content, and it helps to skillfully handle the complicated untypical tasks on all surfaces, be it facade repair, building waterproof, or wood protection. Also, we studied the causes of weathering and fracture of facade construction materials of old buildings. In the restoration process, we suggest using materials from sacrificial, sanitizing and compression plasters and the correct application of desalination compresses, which is a reliable, effective method of salts removal. In addition to special sand-blasting and chemical cleaning of dirt, interior walls may be cleaned using a removable latex film for eliminating contaminants.
Authors and Affiliations
Gh. CROITORU, Ig. COLESNIC
Keywords
Related Articles
- EP ID EP596219
- DOI -
- Views 60
- Downloads 0
Tribological Studies Regarding the Crude Rapeseed Oil Press
The aim of this paper is to present a tribology test conducted on crude rapeseed oil press. The experiments were carried out with four-ball machine. The oil was tested at speed of 1000 rot/min and loads of 140 N and 200...
Characterization of Sintered Hardmetals Coated with TiC
This paper presents the realization of TiC thin films by CVD method. The thin layers of TiC thicknesses were 8 and 10μm, their thickness increasing with time, keeping the temperature. Diffractometer analysis certifies th...
Surface Hardening of 40Cr10 Steel after Short Time Nitriding in Fluidized Bed
The paper is based by nitriding in fluidized bed experiments over laboratory plant. Fluidization applications are characterized by high values of mass and heat transfer coefficients. For experiments were used 40Cr10 (Rom...
Cooling Rate Dependence of STructures Characteristics in Ce-Inoculated Low-S Grey Irons
The efficiency of Ce,Ca,Al-FeSi alloy was tested for lower addition rates (0.15-0.25wt.%), as, traditionally, high inoculant addition rates have been used in low sulphur grey cast irons, comparing to the base iron and co...
Aspects Regarding the Biocorrosion of the Paper Manufactured Machines
This paper presents the main microorganisms causing biocorrosion, the concentration, their effects and a series of measures for their reduction. The conclusion is that the sulpho-reducing bacterius are responsible for th...