Mixed Lubrication Solution of Dynamically Loaded Radial Slide Bearings
Journal Title: Tribology in Industry - Year 2017, Vol 39, Issue 1
Abstract
A solution of radial slide bearing dynamics and tribology incorporating the influences of real surface roughness contacts or the influence of surface roughness on bearing lubrication is presented in this paper. Finite difference method for Reynolds equation discretization, finite element method for calculation of elastic deformations, Gauss-Seidel’s method for iterative solution of discretized equations or Newmark’s algorithm are the methods employed in the proposed solution approach. The coupled structural-fluid solver considering mixed lubrication conditions of the radial bearings is the result. The proposed algorithms are presented for highly loaded radial slide bearing of internal combustion engine.
Authors and Affiliations
P . Novotny
Keywords
Related Articles
- EP ID EP228710
- DOI 10.24874/ti.2017.39.01.09
- Views 73
- Downloads 0
Mechanical and Tribological Behavior of Vinyl Ester Hybrid Composites
An attempt has been made to explore the effect of hybrid reinforcement on mechanical properties and dry sliding wear behavior of vinyl ester (VE) composites. Vinyl ester reinforced with alkali treated coir fibers (CF-VE)...
Development of an Extrusion Process to Ameliorate the Tribological Properties of Heat Treated Al Mg Si (Cu) System Alloys Matrix Composites in Consolidated State
The developments of AA6061 aluminum matrix composites are of great interest in industrial applications for lighter materials with high specific strength, stiffness and wear resistance. In this article, the dry wear beha...
Slew Bearings Damage Detection using Hilbert Huang Transformation and Acoustic Methods
Slow speed slew bearings are widely used in many applications such us radar, aviation and aerospace units, bogie bearings for vehicles, harbor and shipyard cranes. Slew bearings are design to carry out high axial and rad...
PVD Coatings’ Strength Properties at Various Temperatures by Nanoindentations and FEM Calculations Determined
Nanoindentation is usually applied on thin films at ambient temperatures for hardness determination. Recently, instruments for conducting nanoindentation at elevated temperatures have been developed facilitating measurem...
Wear Assessment of Fe-TiC/ZrC Hardfacing Produced from Oxides
The direct conversion of oxides into carbides during plasma transferred arc welding is a promising processing route to produce wear resistant overlays at low cost. In the present study, Fe-TiC and Fe-ZrC composite overla...