Nanostructuring the SiOx layers by using laser-induced self-organization
Journal Title: Semiconductor Physics, Quantum Electronics and Optoelectronics - Year 2017, Vol 20, Issue 2
Abstract
The processes of laser-induced transformation of SiOx oxide layers into the nanocomposite ones were studied. The possibility of phase separation in the form of Si nanocrystals surrounded by corresponding SiO2 oxide matrix under irradiation by nanosecond pulses of YAG:Nd+3-laser were shown. Laser radiation at the fundamental wavelength, λ1 = 1064 nm, and second harmonic, λ2 = 532 nm, were applied at researches. The size and surface concentration of nanofragments dependences on the intensity and wavelength of the laser irradiation have been determined from experimental data based on atomic force microscopy, infrared transmission spectra and electro-physical measurements. SiOx nanocomposite layers containing Si nanoparticles, the size of which depends on laser beam intensity and wavelength, have been obtained. The processes of nanoparticles formation occur mainly through generation and mass transfer of interstitial atoms in the solid mode (before the melting point threshold) due to the effect of laser thermal shock.
Authors and Affiliations
o. v. Steblova, L. L. Fedorenko, A. A. Evtukh
Keywords
Related Articles
- EP ID EP216934
- DOI 10.15407/spqeo20.02.179
- Views 76
- Downloads 0
Transducer based on surface plasmon resonance with thermal modification of metal layer properties
With the purpose to improve such service characteristics of transducers on the basis of the surface plasmon resonance (SPR) as the sensitivity and stability, we have analyzed the influences of a structure and a relief of...
The influence of substrate temperature on properties of Cu-Al-O films deposited using the reactive ion beam sputtering method
For the first time, Cu-Al-O films were grown using the reactive ion beam sputtering at temperatures ranging from 80 to 380 °C in 50 °C increments. Correlations between the properties of as-grown films measured by X-ray d...
Structural, electrical and optical investigations of Cu6PS5Br-based thin film deposited by HiTUS technique
Cu6.35P1.77S4.72Br0.15 thin film was obtained using the high target utilization sputtering onto c-cut sapphire substrates. X-ray diffraction studies show the film to be amorphous with some crystalline inclusions. SEM inv...
Electrical and optical parameters of Cu6PS5I-based thin films deposited using magnetron sputtering
Cu6PS5I-based thin films were deposited onto silicate glass substrates by non-reactive radio-frequency magnetron sputtering. The chemical composition of thin films was determined using energy-dispersive X-ray spectroscop...
Nature and kinetics of paramagnetic defects induced by beta-irradiation of chitosan
A set of chitosan samples irradiated by electrons with various doses were studied using the EPR method. Two kinds of paramagnetic defects PC1 and PC2 initiated by this irradiation due to the breakage of bonds in position...