Journal Title: Materials Engineering - Materialove inzinierstvo (MEMI) - Year 2011, Vol 18, Issue 1
Abstract
Authors and Affiliations
Johannes Steinhaus, Bernhard Moeginger, Mandy Großgarten , Berenika Hausnerova
Keywords
Related Articles
- EP ID EP85717
- DOI -
- Views 139
- Downloads 0
SOLUTION TREATMENT EFFECT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AUTOMOTIVE CAST ALLOY
The contribution describes influence of the heat treatment (solution treatment at temperature 545°C and 565°C with different holding time 2, 4, 8, 16 and 32 hours; than water quenching at 40°C and natural aging at room t...
UTILIZATION OF STEREOLOGY FOR QUANTITATIVE ANALYSIS OF PLASTIC DEFORMATION OF FORMING PIECES
Mechanical working leads to final properties of forming pieces, which are affected by conditions of production technology. Utilization of stereology leads to the detail analysis of three-dimensional plastic deformed mate...
USING THE VIDEOEXTENSOMETRY AND UCI - HARDNESS FOR MONITORING OF AUTOMOTIVE STEEL SHEETS
The paper deals with examination of relation between the hardness and the size of plastic zone during the tensile loading. UCI (Ultrasonic Contact Impedance) micro-hardness method was used for hardness measurements. Defo...
INFLUENCE OF GRAIN SIZE ON DUCTILITY OF MAGNESIUM ALLOYS
The paper give a brief overview on the effect of grain size on the yield strength and the elongation to fracture (ductility) of magnesium alloys. The yield stress, flow stress and fracture stress decrese with decreasing...
The pseudoelasticity and the shape memory effect in CoNiAl alloys
The cobalt alloys (close to the CoNiAl stoichiometry) are the less known shape memory alloys. Such behavior is consequence of the martensitic transformation. The pseudoelasticity is caused by the stress-induced martensit...