Experimental methods for the characterization of fatigue in microstructures
Journal Title: Frattura ed Integrità Strutturale - Year 2013, Vol 7, Issue 23
Abstract
The mechanical fatigue behavior of gold microbeams is analyzed. Dedicated devices have been designed and built able to produce alternate loading on gold specimens; the electrostatic actuation is used as driving force. Gold beams are tested under both bending and tensile alternate loadings. Results were used to plot S-N curves and fatigue Goodman-Smith diagram in order to estimate the fatigue limit of the material in presence of mean and alternate stress conditions. The surface topography evolution is studied and failure modes are discussed.
Authors and Affiliations
G. De Pasquale, A. Somà
Keywords
Related Articles
- EP ID EP119961
- DOI 10.3221/IGF-ESIS.23.12
- Views 65
- Downloads 0
The influence of fibre orientation on the post-cracking tensile behaviour of steel fibre reinforced self-compacting concrete
Adding fibres to concrete provides several advantages, especially in terms of controlling the crack opening width and propagation after the cracking onset. However, distribution and orientation of the fibres towa...
Growth behavior of fatigue cracks in ultrafine grained Cu smooth specimens with a small hole
In order to study the growth mechanism of fatigue cracks in ultrafine grained copper, stresscontrolled fatigue tests of round-bar specimens with a small blind hole as a crack starter were conducted. The hole was...
Methodological developments in the field of structural integrity analyses of large scale reactor pressure vessels in Hungary
Buildings, structures and systems of large scale and high value (e.g. conventional and nuclear power plants, etc.) are designed for a certain, limited service lifetime. If the standards and guidelines of the time...
High-cycle notch sensitivity of alloy steel ASTM A743 CA6NM used in hydrogenator turbine components
The presence of notches and other stress concentrations in turbine blades and other notch hydraulic components is a current problem in engineering. It causes a reduction of endurance limit of material. In that sense, spe...
Applicazione della meccanica della frattura viscoelastica alla previsione della vita di tubi in polibutene
Il Polibutene-1 isotattico (i-PB1) è un materiale polimerico usato per la produzione di tubi per il trasporto di fluidi in pressione. In questo lavoro si sono studiati due tipi di i-PB1 prodotti da Basell che diffe...