Modelling 3D crack propagation in ageing graphite bricks of Advanced Gas-cooled Reactor power plant
Journal Title: Frattura ed Integrità Strutturale - Year 2015, Vol 9, Issue 34
Abstract
In this paper, crack propagation in Advanced Gas-cooled Reactor (AGR) graphite bricks with ageing properties is studied using the eXtended Finite Element Method (X-FEM). A parametric study for crack propagation, including the influence of different initial crack shapes and propagation criteria, is conducted. The results obtained in the benchmark study show that the crack paths from X-FEM are similar to the experimental ones. The accuracy of the strain energy release rate computation in a heterogeneous material is also evaluated using a finite difference approach. Planar and non-planar 3D crack growth simulations are presented to demonstrate the robustness and the versatility of the method utilized. Finally, this work contributes to the better understanding of crack propagation behaviour in AGR graphite bricks and so contributes to the extension of the AGR plants’ lifetimes in the UK by reducing uncertainties.
Authors and Affiliations
Thi Tuyet Vo, Philippe Martinuzzi, Van Tran, Neil McLachlan, Alan Steer
Keywords
Related Articles
- EP ID EP148855
- DOI 10.3221/IGF-ESIS.34.25
- Views 59
- Downloads 0
Comportamento a fatica dei giunti saldati in funzione della densità di energia di deformazione locale: influenza dei campi di tensione singolari e non singolari
. Il criterio della densità di energia di deformazione (SED) considera un preciso volume di controllo posizionato in corrispondenza del piede o della radice dei cordoni di saldatura, ossia delle zone di possibile innesco...
Effects of hydrogen induced delay fracture on high-strength steel plate of automobile and the improvement
Delay fracture is an environmental embrittlement occurring when materials, environment and stress interact with each other and also a form of hydrogen induced material deterioration. It is a leading factor inhibi...
Individuazione frattografica di rotture per fatica in componenti metallici con microstrutture complesse
L’individuazione frattografica delle fratture per fatica risulta spesso piuttosto complessa nei materiali che non esibiscono adeguata duttilità. Microstrutture complesse caratterizzate dalla presenza di numerosi co...
Investigation of crack propagation in single optical fiber composite with thermal influence by finite element method
Two parallel comparative ‘Conventional Method and Computer Simulation using ANSYS software’ for prediction of crack growth and its behavior in optical fiber are studied and presented in this work. Corresponding finite el...
Ratcheting of 316L stainless steel thin wire under tension-torsion loading
A series of cyclic tension-torsion tests under symmetric shear strain and asymmetric axial stress control in various loading paths are conducted on 100 μm-diameter 316L steel wires applying a micro tensiontorsion...