NEW CONCEPT OF A MEASUREMENT PROBE FOR HIGH IMPEDANCE SPECTROSCOPY
Journal Title: Metrology and Measurement Systems - Year 2007, Vol 14, Issue 4
Abstract
The paper presents a new measurement probe working as the input circuit for a high impedance spectroscopy analyzer. The probe allows to measure impedance in the range of 100 Ω < |Zx | < 100 GΩ. The probe extracts two signals proportional to current through and voltage across the measured impedance in a wide frequency range from 100 μHz to 1 MHz. By the use of a current-to-voltage converter the influence of capacitance of the shielded cables connecting the object under measurement on the result of the measurement is kept as low as possible. An analysis of the probe has been performed taking into account most important parameters influencing the measurement accuracy: parasitic capacitance and real-life parameters of operational amplifiers in use. The formula for calculation of the modulus and argument of the measured impedance has been developed taking into account the correction for real-life parameters of the probe. This allows to decrease the maximal measurement errors of the impedance modulus to ca. 1% and of the impedance argument to 2[sup]o[/sup], respectively, in the whole range of measurement frequencies.
Authors and Affiliations
JERZY HOJA, GRZEGORZ LENTKA
Keywords
Related Articles
- EP ID EP91479
- DOI -
- Views 87
- Downloads 0
CONGRESS OF METROLOGY 2007
From 9 to13 September 2007, at the AGH University of Science and Technology, there took place the undoubtedly most important metrological conference, i.e. The Congress of Metrology ‘2007. Metrological congresses are held...
UTILIZATION OF LEVENBERG-MARQUARDT'S METHOD FOR IDENTIFICATION OF THE ELECTRONIC CURRENT TRANSDUCER WITH A HALL EFFECT SENSOR IN A FEEDBACK LOOP
The utilization of Levenberg-Marquardt's method (LM) for the identification of an unknown model parameters of the electronic current transducer with a Hall effect sensor in the negative feedback loop has been described....
THE DEPENDENCE OF BRASS HARDNESS MEASUREMENT SYSTEM ON TIME
Measurement system analysis (MSA) was used for estimation of hardness (HBS) measure- ment system capability. The time dependence of capability was evaluated. Experimental material Cu-Zn-Al cast alloy was used as shape me...
COMPARISON OF LS-TYPE METHODS FOR DETERMINATION OF OLIVE OIL MIXTURES ON THE BASIS OF NIR SPECTRAL DATA
The spectrophotometric analysis of oil mixtures, containing olive oil, is the subject of this paper. Its objective is to compare six least-squares-type estimators which are potentially applicable for determination of a...
SELF-CONFIGURING MEASUREMENT NETWORKS
This discussion paper presents issues in the design of self-configuring networked measurement systems. Key requisites are summarized at first. Then, architectural features will be analyzed in order to let a designer be a...