Optimal Placement of Multiple Distributed Generation to Improve Voltage Stability as well as Minimize Loss in Distribution System
Journal Title: IOSR Journals (IOSR Journal of Electrical and Electronics Engineering) - Year 2018, Vol 13, Issue 3
Abstract
Theaim of paper is to presents a technique based on Particle Swarm Optimization (PSO) to identify the switching operation plan for feeder reconfiguration and optimum size value of DG simultaneously. The key purpose is to diminish the real and reactive power losses and improve the bus voltage profile in the system while satisfying all the distribution constraints. A method based on PSO algorithm to find out the minimum formation is presented and their impact on the network real power losses and voltage profiles are investigated. The results are obtained through MATLAB coding.
Authors and Affiliations
Neeraj Kumar Kushwaha, Abhishek Singh
Keywords
Related Articles
- EP ID EP388781
- DOI 10.9790/1676-1303030106.
- Views 128
- Downloads 0
Harmonic Minimization in 31-Level Cascaded Multilevel Inverter Topology with Reduced Number of Switches
Multilevel inverters are power electronic devices that changes over DC to AC quantity. But these devices produces non-sinusoidal signal which contains harmonics. So as to be overcome this problem a 31-level cascaded mult...
Design Modeling and Simulation of Fuzzy Controlled Svc for Long Over Head Transmission Line
The basic control objectives of a power system are system voltage control, system frequency control, protection and economic operation. Reactive power control is a subset of overall system control and stability. A power...
Development of a Wavelet-ANFIS based fault location system for underground power cables
In the past decade, electricity demand has increased rapidly in metropolitan areas. All over the world, large scale underground power cable installations networks are replacing overhead transmission lines due to environm...
State of Art on Short Term Load Forecasting Using Artificial Neural Network
Due to centralized power system and continuous varying nature of load it is very difficult to balance demand and generation at all time. It is due to the fact that generation can’t be controlled with the same pace as loa...
Dynamic Reconfiguration of Analog VLSI System: A Review
Dynamic reconfigurable system came in to limelight in the current generation of VLSI design. Till now area, performance, cost and power are the priorities of design engineers overlooking the Multifunctionality of a singl...