Optimization of Process Parameters of Friction Stir Welding of Aa 6082-T6 Using Grey Based Taguchi Method
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
Friction stir welding process is a mushy state joining technique and is extensively used for unification of similar and dissimilar metals employed for aerospace, automobile and other fabrication industries. Friction stir welding gives improved mechanical and metallurgical characteristics in the nugget zone in contrast with the conventional welding processes. In this study, three main factors, each at two levels are employed during experiment; The responses measured in the study include hardness, Impact toughness and percentage elongation and are converted into grey values. The optimal permutation of parameters has been found by the Taguchi Grey relational analysis.
Authors and Affiliations
N. RAVINDER REDDY, V. V. SATYANARAYANA, G AMBIKA, S. PRASAD KUMAR
Keywords
Related Articles
- EP ID EP279613
- DOI 10.24247/ijmperdfeb201840
- Views 115
- Downloads 0
CONTACT STRESS ANALYSIS & OPTIMIZATION OF SPUR GEAR BY FINITE ELEMENT ANALYSIS
The gears are the most common means to transmit the power. Spur Gears are used in many machine tools to transmit the power like Lathe machines, Drilling Machines etc. Since the Spur gears are subjected to high loads in s...
Performance Studies on diesel Engine Stabilized with TBC and Glycine Max Blended Oil
These days, thermal barrier coatings are gaining remarkable attention among researches owing to their wide applications and impact on several critical performance parameters of an engine. This throws light on the experim...
Performance Studies on the Reversing Valve Incorporated Air-to-Water Heat Pump with Heat Storage Device
In order to avoid the rapid on and off, the condition of partial load is maintained by the heat storage device. With Plate heat exchanger in the air to water heat pump, the heat storage device is for heating along with l...
THE COMPARISON OF DEVIATIONS OF FREEFORM SURFACES USING RE-ENGINEERING BY NON-CONTACT SCANNERS
There are various types of optical and Laser 3D scanners used for capturing the point cloud data in reverse engineering approach. The present article deals with the comparison of EINSCAN Scanner and the V5 PERCEPTRON 3D...
The Generative Design and Analysis of a Formula One Race Car Chassis
A general Formula One (F1) Racing Car chassis requires great strength to bear the damages caused due to the crash. So, our aim is to maximize the strength of the Formula One race car chassis by using Generative design so...