OPTIMIZATION OF THE PLASTIC INJECTION PROCESS THROUGH THE MODIFICATION OF THE PROCESS FUNCTIONAL PARAMETERS
Journal Title: TEHNOMUS - Year 2011, Vol 18, Issue 1
Abstract
The paper presents the optimization of the plastic injection process through the reduction of the cooling and removing times. For the deployment of the experiment the PA 6 polyamide will be used. The SolidWorks and Moldflow software packages will be used for CAD and process simulation, the material flow into the mold, as well. The experiment aims to obtain the optimal variant of PA 6 polyamide injection through the modification of the mold as well as the melt temperature in order for the mold filling to be complete and the cooling time to be as short as possible, therefore generating an increase of productivity.
Authors and Affiliations
Teodor - Daniel Mindru, Ciprian Dumitru Ciofu, Dumitru Nedelcu
Keywords
Related Articles
- EP ID EP97404
- DOI -
- Views 115
- Downloads 0
CONSIDERATIONS REGARDING THE USE OF CHUCK COLLETS IN MECHANICAL SYSTEMS
In this paper the authors aim to present the theoretical study of of constructions such as clenching mechanisms with chuck collets. For this to has been modernized the test stand clenching mechanisms with chuck collets e...
RESEARCH ON THE CORROSION BEHAVIOR OF ZINC COATING BY MEASUREMENT OF POLARIZATION RESISTANCE
Measurement of polarization resistance of micro-alloyed zinc layers followed corrosion products characterization and corrosion behavior of the default layers analyzed. We have studied microalloyed zinc coatings with diff...
RESEARCH STUDY OF HARDNESS VALUES OBTAINED WITH DYNAMIC HARDNESS TESTER PROTOTYPE DD01
The paper submitted for publication is a comparative study of the hardness values recorded on metallic and non-metallic samples, values that been taken over with a standardized hardness tester Shimadzu HMV-2T, respective...
STUDY FOR THE VARIATION OF HARDNESS AND RESILIENCE CHARACTERISTICS AFTER HEAT TREATMENT FOR STAINLESS STEELS
The paper presents tests of the stainless steel. This material was subjected to heat treatments, afterwards conducted impact bend tests and hardness measurements. Using the data was drawn graphic variation of hardness an...
RESEARCHES ON THE INFLUENCE OF ELECTRICAL PARAMETERS OF CIRCUIT ON DEPTH OF DRAWING OF CIRCULAR PARTS THROUGH ELECTRO-HYDRAULIC PROCESS
This paper deals with the influence of the discharge electrical parameters such as wire length and diameter priming discharge, discharge capacity and battery voltage on the stamped depth to electrohydraulic method