Performance Comparison of Dispersion Compensation Schemes Using DCF in DWDM Optical Network
Journal Title: Jurnal INFOTEL - Year 2018, Vol 10, Issue 2
Abstract
The dense wavelength division multiplexing (DWDM) system enhances bandwidth capacity for long-haul communications system, but the system performance is affected by a chromatic dispersion especially in the high bitrate communication caused by different refractive index in pulse propagation for optical link. Using the Dispersion compensating fiber (DCF) can compensate for the positive dispersion in the optical link because it has negative dispersion value and can reduce the effect of the chromatic dispersion. We look for the suitable DCF scheme in our DWDM System using 16 channels with bitrate 40 Gbps per channel, channel spacing 200 GHz and optical link length 300 km and discuss the system performance to compensate dispersion in DWDM systems with the optical launch power variation. Based on the result, the system with the symmetrical scheme with optical power launch had the best performance with BER 8.33 × 10-86 and Q-factor 19.572. Optical power launch had the effect to the system performance, the optical power launch 0 dBm in the all DCF scheme was not meet with ITU-T standard for optical link. In sequentially Q-factor of the pre-compensating, post compensating, and symmetrical compensating fiber schemes is 6.007, 6.209, and 6.608 which are not meet the ITU-T standard that Q-factor has to more than 7.20. The increasing optical power launch improved the system performance for all DCF scheme. In sequentially Q-factor of the symmetrical scheme with input power 0 dBm, 2 dBm, 4 dBm, 6 dBm, 8 dBm, and 10 dBm is 6.680, 8.510, 10.724. 13.340, 16.319, 19.572. This work obtains that the system with symmetrical compensating fiber more suitable than pre-compensating fiber and post-compensating fiber and the system with high optical launch power has better performance than low power
Authors and Affiliations
Fauza Khair, Fahmi Fahmi, Dodi Zulherman
Keywords
Related Articles
- EP ID EP469766
- DOI 10.20895/infotel.v10i2.362
- Views 124
- Downloads 0
Identifikasi Telapak Tangan menggunakan Jaringan Syaraf Tiruan Learning Vector Quantization (LVQ)
The system of self-knowledge (personal recognition) is a system to recognize a person's identity automatically using a computer with a password (password), ID card, or PIN to identify a person. However, introducing thems...
Deteksi Iris Berdasarkan Metode Black Hole dan Circle Curve Fitting
Sistem pengenalan identitas personal berdasarkan ciri biometrika adalah suatu sistem pengenalan seseorang berdasarkan pada ciri biometrika yang melekat pada orang tersebut. Iris mata merupakan salah satu ciri biometrik y...
Pengendali Listrik Rumah Berbasis Cloud Computing
This paper discusses about how to reduce energy consumption in the home through the provision of information to the residents on the use of electricity at home, and provides an effective way to respond to that informatio...
Augmented Reality sebagai Alat Pengenalan Hewan Purbakala dengan Animasi 3D menggunakan Metode Single Marker
This time to learn Animals Archaeological through history lesson at school only be done only through a book and images contained in the books and props usual, but by using augmented reality technology is expected to be a...
Analisis Information Technology Governance Pada PT. Pertamina (Persero)
Information Technology Governance (IT Governance) merupakan faktor penting bagi organisasi atau perusahaan dalam memanfaatkan teknologi informasi. Adanya IT Governance akan memberikan jaminan bahwa pemanfaatan teknologi...