Promising Cathode Material for Lithium Power Sources LaFe0.5Cr0.5O3
Journal Title: Фізика і хімія твердого тіла - Year 2017, Vol 18, Issue 4
Abstract
Nanoscale powders of LaFe0.5Cr0.5O3 with perovskite structure were synthesized by sol-gel combustion method in this work. From X-rays phase analysis obtained material was consisted of one phase LaFe0.5Cr0.5O3 (space group P m -3 m). The average size of RCS of test material is 21 nm. Specific surface area is 14 m2/g. The average particle size is 63.7 nm by approximation that particles form is spherical. Nanoscale powders of LaFe0.5Cr0.5O3were tested as cathode material for lithium power sources. The cathode material demonstrates the specific power capacity of 571 A•h/kg when the discharge of the source is up to 0.5V.
Authors and Affiliations
I. P. Yaremiy, M. L. Mokhnatskyi, L. V. Mokhnatska, S. I. Yaremiy, A. I. Kachmar
Keywords
Related Articles
- EP ID EP265459
- DOI 10.15330/pcss.18.4.448
- Views 57
- Downloads 0
Calculations of the Thermal Conductivity of Si1-xGex Films with Nonuniform Composition
SiGe films have attracted much attention recently due to experimental demonstrations of improved thermoelectric properties over those of the corresponding bulk material. However, despite this increasing attention, availa...
Design and Technological Aspects of SC Structures on Silicon Epitaxial Structures
Investigated parameters and characteristics of CE structures made from silicon epitaxial structures. Presented system: activated boron or phosphorus silicon substrate and epitaxial layer, which coincides with the substra...
Thermoelectric Nanocomposite Materials Based on Doped Lead Telluride (Review)
A review of the problems of obtaining and research complex thermoelectric properties of composite materials doped Update the various elements of the periodic table of lead telluride semiconductor promising compound for m...
Electrochemical Synthesis of Surface Oxide Layers on the Amorphous Metallic Alloys Fe-Nb-B-REM
Electrochemical characteristics of the amorphous metallic electrodes Fe-Nb-B-REM with oxide-hydroxide layers have been obtained by voltamperometric investigation. During the process has been used regular saturation of KO...
The Nature of the Formation of the Compounds MeIMeIIIP2S6(Se6) (where MeI - Cu, Ag; MeIII - In, Bi, Cr) and Methods of Growing for Their Single Crystals
Physico-chemical interaction in the systemsMeIMeIIIS2(Se2) -“P2S4(Se4)” was studied using X-ray powder diffraction and differential thermal analysis. The technological conditions of growing single crystals for the compou...