REALIZATION OF UNDERGROUND OBJECTS BY THE OPEN CAISSON METHOD IN CONDITIONS OF BUILT-UP AREAS
Journal Title: Structure and Environment - Year 2017, Vol 0, Issue 3
Abstract
The article presents the construction of underground objects by open caisson method, under conditions of built-up areas. The technological stages of the open caisson sinking have been separated. The work identified the main causes affecting the deformation of the soil mass surrounding the open caisson. On this basis, the most important construction and technological projects were devoted to the reduction of deformation of the ground surrounding the open caisson during sinking. The ultimate goal of the article is to determine the optimal way to reduce the frictional forces on the outer surface of the reinforced concrete coat of the open caisson. This has been achieved through the implementation of multidimensional technical and economic analysis as the main components in the form of biplots.
Authors and Affiliations
Ryszard Dachowski, Paulina Kostrzewa
Keywords
Related Articles
- EP ID EP245333
- DOI -
- Views 211
- Downloads 0
DETERMINATION OF HEAT TRANSFER COEFFICIENT IN THE PHASE-CHANGE HEAT STORAGE DEVICE
This article describes information about the research of the heat transfer coefficient from air to water on the basis of comparison of theoretical calculations with the use of mathematical modeling and experimental studi...
THE TRANSFER COEFFICIENT OF HEAVY METALS FROM THE INPUT SEWAGE SLUDGE TO THE ASH
Sewage sludge incineration may have adverse impact on the environment due to heavy metals toxicity. Heavy metals concentrations in sewage sludge ash increased in comparison to concentrations in sewage sludge. The aim of...
TECHNOLOGICAL ASPECT OF BRICK PRODUCTION USING THE METHOD OF AUTOCLAVING
Production of sand-lime bricks using the autoclaving method is a well-known process, especially in Europe. During the autoclaving process, also called the hydrothermal treatment or hardening the materials with lime and/o...
ACCUMULATION OF LOW-POTENTIAL THERMAL ENERGY
The article presents interpretation of accumulation of thermal energy in a vertical borehole. It describes measuring device and final graph of measurement. It studies mainly the influence of water on storage capacity of...
REINFORCING OF HISTORICAL CEILING BEAMS IN THE SHEAR ZONE
The article discusses the issues concerning rehabilitation and strengthening of wooden beams in historical naked ceilings in their support area. The causes and effects of the damage in the wooden beams shear zones have b...