Regeneration of Hard Alloy Wastes by Low Energy Consumption and Environmentally Friendly Hydrothermal Technology
Journal Title: Фізика і хімія твердого тіла - Year 2015, Vol 16, Issue 1
Abstract
Hard alloys are indispensable material for many branches of modern industry. However, even with the base composition (WC-Co) they are quite expensive due to the limited natural resources of cobalt and the complexity of their production from the minerals. Therefore, the collection and recycling of hard alloys waste have not only scientific but practical importance, taking into account that the cost of production of 1 ton of alloy from recovered waste comes to 20% cheaper than in the core technology. Existing methods of hard alloys waste treatment have several disadvantages, the main of which are high power consumption and big load on the environment. As a result of this research a high-performance, low-energy consumption, eco-friendly way for recycling of hard alloys waste has been proposed. According to this technology, in a first step the WC powder, and the solution containing cobalt salts were obtained by autoclaving at 230 °C in a mixture of HCl-H3PO4-HNO3 acids, and followed then metal cobalt recovery from hydrothermal solution at temperatures of 110 – 160 °C.
Authors and Affiliations
S. F. Korablov
Keywords
Related Articles
- EP ID EP313902
- DOI 10.15330/pcss.16.1.176-180
- Views 49
- Downloads 0
Peculiarities of Morphology Formation of Silicon Surface under the Action of Laser Pulses
The experimental studies of geometry features of silicon layers in areas of second and millisecond laser pulses were carried out. The results of microscopic studies of periodic structures that are formed on the surfaces...
Interaction of Electromagnetic H-wave with the Thin Metal Film is Located on the Dielectric Substrate
Interaction of electromagnetic H-wave with thin metal film is located between two dielectric environments ε1, ε2 in the case of different incident angles of H-wave θ and in the case of different reflection coefficients q...
Features of the Structural, Energetic and Kinetic Properties HfNi1-xRuxSn Solid Solution
The crystal and electronic structure, energy and kinetic properties of semiconducting HfNi1-xRuxSn solid solution in the ranges : T = 80÷400 K, ≈ 9,5•1019 см-3 (х = 0,005) ÷ 5,7•1020 см-3 (х = 0,03), was investigated. Th...
Peculiarities of Forming of Microwave Arsenide-Gallium Submicron Structures of Large-scale Integrated Circuit
The peculiarities of technological processes of formation of submicron Schottky field transistors usingarsenide-gallium technology, i.e. the technology of Schottky field transistors formation with a self-alifned gate ont...
Схемотопологічне моделювання перетворювачів рівнів сигналів для аналітичних мікросистем-на-кристалі
В роботі наведено результати схемотопологічного проектування і комп’ютерного моделювання перетворювачів рівнів сигналу для інтегральних схем та аналітичних мікросистем на базовому матричному кристалі (БМК) зі структурами...