Regulation of polymer composite building material mixing components quality in the production process
Journal Title: Вісник Одеської державної академії будівництва та архітектури - Year 2017, Vol 1, Issue 66
Abstract
The development of the construction industry requires creation of new materials with specified strength characteristics and minimal weight. The characteristics of materials largely depend on the quality of mixing their components. Two main technological processes are: mixing different powder fillers and mixing obtained mixture with polymers. In both processes, the required quality must be ensured. The quality of mixing of powder materials is characterized by obtaining a homogeneous mixture (the dispersion composition of the sample, taken in any volume, must coincide with average dispersion composition of mixture). The radioisotope method of analysis that can be used to control the quality of mixing components directly in the production process was suggested in the article. The control system of the powdery components mixing process was proposed, the simulation in the software MATLAB-Simulink was performed. The simulation results allow us to propose a similar system for implementation in the production process.
Authors and Affiliations
A. M. , Tigariev, T. G. , Tigarieva
Keywords
Related Articles
- EP ID EP317526
- DOI -
- Views 96
- Downloads 0
Saving the «spirit of the place» at the revalorization of the historic small town
This article proposes a solution of the problem of increasing the value of the existing historic environment of a small town by restoring the architectural and artistic significance of its architectural and urban monume...
Urban planning aspects of reconstruction of transport infrastructure and the creation of artificial territories
This article discusses aspects of one of the main reasons that complicate urban development of the city of Odessa – particularly road transport network, which does not meet the needs of freight and passenger traffic of t...
Comparison of internal efforts in elements of type trestle pier at the main and emergency load combination
By design scheme of berthing facilities trestle of type investigation of structures bearing capacity at influence on it different combinations as the basic load and emergency, including a seismic action was carried out....
Effects of the chemical waste production on the peculiarities of the polymerconcrete
A number of researches have been done to identify the cheapest materials and those ones, which are able to perform functions of binders in mortars and concretes effectively. Such materials are wastes of chemical industri...
Calculation of design heat loading of building heating systems by european and domestic methods
On the example of the residential building with a heated basement floor in Rivne, the design heat load of heating system was calculated using national standard SNiP 2.04.05-91 * and according to European standard EN 1283...