Research on Application of Photothermal Imaging Technology in Urban Rail Transit Vehicle Intelligent Operation and Maintenance
Journal Title: Urban Mass Transit - Year 2025, Vol 28, Issue 1
Abstract
［Objective］ At present, the lack of monitoring means for the operation status of key components such as axle boxes, gearboxes, and traction motors in the daily operation of urban rail transit trains, makes it impossible to realize the fault early warning and tracking of the key components, and meet the requirements of precise maintenance of the trains. To adapt to the demands of intelligent operation and maintenance technology development, it is necessary to study and solve problems of the operation status monitoring and the fault early warning of key components. ［Method］ In view of the current application status of comprehensive monitoring technology for railway vehicles, it is proposed to set up a track side comprehensive monitoring equipment of the line based on photothermal imaging technology and acoustic diagnosis to collect the temperature and noise information of the key components du-ring train operation. Dynamic monitoring and fault diagnosis of the train key components is realized by establishing a fault judgment model. ［Result & Conclusion］ Photothermal imaging technology characterizes its detection as multi-points, large coverage, strong vehicle model adaptability, accuracy, and visual results. When combined with acoustic diagnosis and other technologies, it can realize real-time monitoring and fault diagnosis for the train key component operation status, providing technical support for precise maintenance of trains.
Authors and Affiliations
Jianhua ZHANG
Keywords
Related Articles
- EP ID EP755019
- DOI 10.16037/j.1007-869x.2025.01.042
- Views 8
- Downloads 0
Research on the Power Supply Scheme for LTE Remote Equipment on Urban Rapid Transit Lines Based on DC Remote Power Supply Technology
Objective With regard to the equipment power supply demand for long-distance section of urban rapid transit lines, the traditional point-to-point and cross-redundant power supply method for remote equipment in urban rail...
Numerical Analysis of Smoke Temperature Characteristics below the Fire Ceiling in Main Transformer Room of Urban Rail Transit Substation
Objective With the increasing power supply load required by metro, the operation of oil-immersed equipment such as wet-type transformers under overload conditions is extremely prone to fire, posing a threat to the safety...
Analysis of the Digital-Intelligent Development of Medium and Low Capacity Rail Transit System
Objective With the rapid development of rail transit technology and intelligent improvement of urban public transportation, the digital and intelligent concept extends and spreads widely in urban rail transit system, gra...
Construction Scheme and Influence Analysis of Shallow-Buried Large Diameter Steel Pipe Curtain
［Objective］ The construction of shallow-buried pipe curtain structure may disturb the stratum and cause ground deformation. Therefore, it is necessary to study the influence of pipe curtain structure jacking sequence o...
Study on the Segment Damage Mechanism of Curved Shield Tunnels during Construction Stage
Objective Damage to shield tunnel segments will cause water seepage in the tunnel, affecting the structural bearing capacity and endanger the operational safety. Therefore, it is necessary to study the mechanism of segme...