Research on the change of the combined moment of inertia for two-link manipulator with angular coordinate system
Journal Title: Gіrnichі, budіvelnі, dorozhnі ta melіorativnі mashini - Year 2024, Vol 1, Issue 103
Abstract
The main of the problems of the development of two-link manipulators with an angular coordinate system is the lack of effective and universal control systems capable of implementing energy-intensive modes of movement. This is due to the design features of the pointer system of such manipulators and the methods of their use. During the operation of the manipulator, significant dynamic loads occur in its drive system, which create oscillations of the mechanical system and reduce the accuracy of work. The control system must also effectively compensate for such dynamic variations. Dynamic equations of motion used to build manipulator control controllers, which allow taking into account various features of using manipulators. These mathematical models necessarily contain one of the characteristics in the form of the combined moment of inertia of the mechanical system, which is important in the calculation of differential equations and the determination of kinematic parameters of motion. In this article, the combined moments of iner-tia of the boom system of a two-link manipulator with an angular coordinate system are determined. A study was carry out and it shown that the nature of the change in the combined mo-ments of inertia influenced by the modes of movement of the boom system links. The results of the study showed that the com-bined moment of inertia of the boom system of the manipulator is not a constant value, which does not change uniformly under special operating conditions of the machine. To determine the combined moments of inertia, the method of bringing the kinetic energy of the moving system to the drive mechanism was apply. This is relevant, because in the future it will be necessary to adjust the unevenness of the movement of the manipulator links by the drive itself. The study was conduct for a typical linear motion mode and a motion mode with a change in speed along a parabolic trajectory.
Authors and Affiliations
Yaroslav Korobenko, Dmytro Mishchuk, Illja Sankin
Keywords
Related Articles
- EP ID EP745272
- DOI https://doi.org/10.32347/gbdmm.2024.103.0101
- Views 42
- Downloads 0
Analysis of the principles of working load formation in power drives of construction machines and equipment
The purpose of the proposed article is the analysis of the principles of the formation of the workload on the executive bodies of construction machines and technological equipment, which is due to the need for their impr...
Experimental research procedure of roller forming unit
Experimental research is conducted followed by a comparative analysis of the results, which are obtained in the process of theoretical and experi-mental studies, to check the theoretical research adequacy of the roller f...
Justification and static calculation of the adaptive moving counterweight of a single-bucket excavator
The results of an analytical study of the effect of loads on the equipment of a single-bucket excavator are presented, and an analysis of previous studies is performed. The work highlights that the work process of a uni...
Review and analysis of software simulators for robotic information systems
The rapid development of educational technolo-gies requires the active involvement of new means and effective teaching methods. One of the innovative tools of learning in the field of robotics is the use of robot simulat...
Calculation of horizontal collective drainage pipelines of reclamation systems in the presence of a ground water level slope
The purpose of this work is to develop a method-ology for calculating the parameters of pressure horizontal collective drainage pipelines of recla-mation systems that operate in the presence of a ground water level slope...