Role of covalent bond formation in morphology and properties of PP/PP-g-PS binary blends
Journal Title: Polyolefins Journal - Year 2018, Vol 5, Issue 1
Abstract
PP-g-PS copolymer is a typical compatilizer used in polypropylene and polystyrene immiscible blends. PP-g-PS copolymers with different side chain lengths were synthesized, and their thermal and mechanical properties were characterized by differential scanning calorimetry (DSC), polarizing optical microscopy (POM) and dynamic mechanical analysis (DMA), respectively. The DSC and POM results show that the introduction of PS side chain dramatically accelerates the crystallization rate of the PP main chain due to the covalent bond in the PP and PS copolymer. Furthermore, the copolymers become more rigid as the PS component content increases. Blend of PP with PP-g-PS copolymer was prepared to investigate the compatibility between PP and PS. The properties of five PP/PP-g-PS binary blends were characterized by DSC, DMA, scanning electron microscopy (SEM) and mechanical testing. Well dispersion of PS and small PS particle size are detected in the binary blends. The formation of covalent bond between PP and PS also increases the compatibility and interfacial adhesion between these two phases.
Authors and Affiliations
Qian Li, Yongjie Zhang, Huayi Li, Zhongchuan Peng, Yu Zhang, Youliang Hu
Keywords
Related Articles
- EP ID EP283213
- DOI 10.22063/POJ.2017.1879.1100
- Views 128
- Downloads 0
Effect of NH3/methylaluminoxane/dodecylamine modifiednanoclay on morphology and properties of polyethylene/ clay nanocomposites prepared by in-situ polymerization
This study presents methods for treating a kind of nanoclay and investigates the effects of methylaluminoxane (MAO) exposure time and or dodecylamine (DDA) reflux time on in-situ polymerization of ethylene in the presenc...
Amoco CD commercial polypropylene catalyst tailor-made for the Amoco-Chisso gas phase process
The commercial profile of the Amoco CD MgCl2 supported polypropylene catalyst is presented. The development, the unique method of preparation/production, with emphasis on particle morphology, and the parameters affecting...
Probing into morphology evolution of magnesium ethoxide particles as precursor of Ziegler-Natta catalysts
Mg(OEt)2 with spherical morphology is one of the most important precursors for the preparation of industrial Ziegler-Natta catalysts. In the present article, morphology evolution of Mg(OEt)2 particles is studied in the c...
Mathematical modeling the effect of catalyst initial shape and the crack pattern in olefin copolymerization
A two-dimensional (2D) single particle model for the copolymerization of propylene-ethylene with heterogeneous Ziegler-Natta catalyst is developed. The model accounts for the effects of the initial shape of the catalyst...
Active site nature of magnesium dichloride-supported titanocene catalysts in olefin polymerization
Heterogeneous Ziegler-Natta and homogeneous metallocene catalysts exhibit greatly different active site nature in olefin polymerization. In our previous study, it was reported that MgCl2-supported titanocene catalysts ca...