Structural and Kinematic Synthesis of the 1-DOF Eight-Bar Walking Mechanism with Revolute Kinematic Pairs
Journal Title: Український журнал із машинобудування і матеріалознавства - Year 2017, Vol 3, Issue 2
Abstract
Problem statement. The use of existing and the most widespread drives (wheeled and caterpillar one) is sometimes limited by complicated operational conditions while moving on rough terrain. The mentioned drives require a relatively flat surface to be operated effectively. A rocky or a hilly terrain imposes the demand of the use of alternative types of drives, in particular, walking ones. Purpose. In this paper, there will be proposed and analysed one of the possible structures of the walking mechanism for mobile robotic system to be used on rough terrain. Methodology. While carrying out the investigations, the structural and kinematic synthesis of the eight-bar hinge-lever walking mechanism has been performed using the well-known methods of the Theory of Machines and Mechanisms, in particular, the method of closed vector loops. In order to conduct experimental investigations and simulation of the mechanism motion, the applied software SolidWorks and MapleSim has been used. Findings (results). The structure and geometrical parameters of the eight-bar walking mechanism have been synthesized with the aim to ensure the required trajectory and kinematic characteristics of the supporting foot motion. Originality (novelty). The analytical dependencies describing the trajectory of each hinge of the analysed walking mechanism have been derived and the kinematic optimization synthesis problem has been solved. This allowed to substantiate of the mechanism’s geometrical parameters and to analyse its kinematic characteristics. Practical value. The proposed structure of the walking mechanism can be effectively used in various mobile robotic systems and in transporting and technological machines in order to ensure the possibility of their use on rough terrain where there is no ability to use wheeled and caterpillar drives. Scopes of further investigations. While carrying out further research, it is necessary to analyse the influence of the weight coefficients on the solution of the optimization problem, as well as to take into account the necessity of changing the step length and the foot lifting height during the process of walking according to the surface obstacles sizes.
Authors and Affiliations
Vitaliy Korendiy
Keywords
Related Articles
- EP ID EP281288
- DOI 10.23939/ujmems2017.02.088
- Views 92
- Downloads 0
Dynamic Properties Predictions for Laminated Plates by High Order Theories
The main aim of this study is to predict the elastic and damping properties of composite laminated plates. Some approximate methods for the stress state predictions for laminated plates are presented. For simple uniform...
Sound Transmission Properties of Composite Layered Structures in the Lower Frequency Rangee
This study aims to predict the sound transmission properties of composite layered plates structures in the lower frequency range. In present paper a novel procedure to derive the sound isolation parameters for layered pl...
Theoretical foundations for the development of experimental equipment for determining the load capacity of speed change devices
The article gives the theoretical base for construction of equipment for experimental research of static, kinematic and dynamic characteristics of devices for speed change by epicyclic gear trains with closed circuit hyd...
Synthesis of Structure and Research of Operation of Resonance Two-mass Vibrating Table with Electromagnetic Drive
An industrial necessity of creation of 100-Hz vibratory tables is grounded. The prospect of researches of just resonance electromagnetic vibratory tables is conditioned. The existing vibrating tables on the basis of elec...
Mathematical Model of Elements of Automated System of Loose Materials Dosing
Automatic dosing system for loose materials is widely used in construction, food and pharmaceutical industries to prepare various mixtures. The main criterion for optimization of such systems is the accuracy of dosing of...