SYNTHES OF ROBUST ACTIVE SHIELDING SYSTEMS OF MAGNETIC FIELD GENERATED BY GROUP OF HIGH-VOLTAGE POWER LINES
Journal Title: Електротехніка і Електромеханіка - Year 2018, Vol 0, Issue 5
Abstract
Aim. The synthesis of robust active shielding system of magnetic field, generated by group of high voltage power lines for reducing the induction of the initial magnetic field to the sanitary standards level and reducing the sensitivity of the system to variations in the plant parameters is given. Methodology. The synthesis is based on the solution of a multi-criteria stochastic game, in which the gain vector is calculated on the basis of the Maxwell equations solutions in the quasi-stationary approximation. The equilibrium state of the game is based on the stochastic multiagent optimization algorithms of the multiswarm particles. The initial parameters for the synthesis of active shielding system are the location of the high voltage power lines with respect to the protected from transmission line space, geometry and number of cables, operating currents, as well as the size of the protected space and normative value magnetic field induction, which should be achieved as a result of screening. The objective of the synthesis of the active shielding system is to determine their number, configuration, spatial arrangement, wiring diagrams and compensation cables currents, setting algorithm of the control systems as well as the resulting value of the induction magnetic field at the points of the protected space. Results. Robust active shielding system synthesis results for reduction of a magnetic field generated by group of high voltage power lines is given. The possibility of a significant reduction in the level of induction of the magnetic field source within and reducing the sensitivity of the system to variations in the plant parameters is given. Originality. For the first time carried out the synthesis of the robust active shielding systems of magnetic field generated by group of high voltage power lines within a given region of space. Practical value. Practical recommendations on reasonable choice of the number and spatial arrangement of compensating cables of robust active shielding systems of the magnetic field generated by the group of high voltage power lines is given.
Authors and Affiliations
B. I. Kuznetsov, T. B. Nikitina, V. V. Kolomiets, I. V. Bovdui, A. V. Voloshko, E. V. Vinichenko
Keywords
Related Articles
- EP ID EP494952
- DOI 10.20998/2074-272X.2018.5.06
- Views 92
- Downloads 0
COMPARISON OF ADJUSTABLE HIGH-PHASE ORDER INDUCTION MOTORS’ MERITS
Purpose. Development of mathematical models of adjustable electrical drives with high-phase order induction motors for their merits analysis at static and dynamical modes. Methodology. At the mathematical modeling main k...
A TECHNIQUE OF MEASURING OF RESISTANCE OF A GROUNDING DEVICE
Introduction. Measurement of resistance of the grounding device (GD) by means of a three-electrode system. This requires not only the right choice of installation locations of measuring electrodes, but also the determina...
LIMITATIONS OF CURRENT OF THE THREE-PHASE ACTIVE POWER FILTER IN THE CONDITIONS OF OVERLOAD AND SHORT CIRCUIT
Purpose. The purpose of the work is to develop a method of limiting the maximum allowable level of current of a three-phase active power filter in conditions of overload or short circuit and a system for the implementati...
METHOD FOR VOLTAGE CONTROL IN CHARGE CIRCUIT OF ELECTRIC DISCHARGE INSTALLATIONS WITH TWO CAPACITORS UNDER NONZERO INITIAL CONDITIONS
Purpose. To analyze the transient processes in the charge circuit of electric discharge installations with two capacitors, taking into account the change in the initial conditions of such processes (initial voltage on th...
EXPERIMENTAL INVESTIGATIONS OF ELECTRO-THERMAL RESISTIBILITY OF CONDUCTORS AND CABLES TO ACTION OF RATIONED ON THE INTERNATIONAL STANDARD IEC 62305-1-2010 APERIODIC IMPULSE OF CURRENT OF ARTIFICIAL LIGHTNING
Purpose. Experimental researches of electro-thermal resistibility of cable-explorer products, applied in the power electric circuits of objects of electric-power industry, to action on its copper and aluminum parts beari...