THE ANALYSIS OF WEAR OF THE LAYERS CONTAINING WC/W2C IN ABRASIVE SOIL
Journal Title: Tribologia - Year 2016, Vol 269, Issue 5
Abstract
The paper presents the results of research involving the resistance of hardfacing materials containing WC/W2C carbides to abrasive wear. The tested hardfacing materials were made using PJ5D and El-Tung FeA rods. The WC/W2C carbide contents of the examined materials amounted to 90% and 60%. These materials are meant to be used in mining tools subject to intense abrasive wear. In spite of its higher WC/W2C carbide content, the intensity of wear of the hardfacing material made using the PJ5D rod was higher than that of the hardfacing material made using the El-Tung FeA rod. Wear resistance tests were conducted by means of the “spinning bowl” method, using real (natural) soil masses. Light and heavy soil masses were used.<br/><br/>
Authors and Affiliations
Jerzy NAPIÓRKOWSKI, Krzysztof LIGIER
Keywords
Related Articles
- EP ID EP241330
- DOI 10.5604/01.3001.0010.6612
- Views 67
- Downloads 0
THE IMPACT OF SELECTED LUBRICANTS ON FRETTING WEAR DEVELOPMENT IN A FRICTION PAR AXLE–SLEEVE
Complex physicochemical phenomena occurring at the interface between associated surfaces and the impact of a large number of factors makes the development of fretting wear mechanism difficult to describe and it has not r...
THE INFLUENCE OF TRIBOTESTER AND FRICTION PROCESS PARAMETERS ON WEAR SCATTER
Wear values obtained from different tribological experiments for the same materials and process parameters can vary significantly. The influence of friction process parameters on reproducibility and comparability of wear...
RESEARCHING AND MODELING OF THE DYNAMIC VISCOSITY OF THE FERRO-OILS WITH THE DIFFERENT CONCENTRATIONS OF MAGNETIC PARTICLES IN THE ASPECT OF PRESSURE CHANGES
In this article, the results of the experimental research of determining the dynamic viscosity of the ferro-oils with different concentration of the magnetic particles in terms of pressure change are presented. The resea...
TRIBOLOGICAL PROPERTIES OF CAST IRON EN-GJSFP-500-7 AFTER A BURNISHING PROCESS MODIFIED BY EXPLORATION PREPARATIONS BASED ON SOLID LUBRICANT AND CHEMICAL ACTION
In the paper, the results of research on the base machine oil SN-150 and the exploitative preparations R-2000 (preparation on the basis of soft metals) and Motor LIFE (preparation using chemical actions) influence on the...
ANALYSIS OF TRIBOLOGICAL PROPERTIES OF TWO-COMPONENT, CERAMIC FILLED EPOXY LAYERS UNDER HYDRO-ABRASIVE WEAR CONDITIONS
The paper presents the analysis of the abrasive wear of the selected mate-rials used for the regeneration of the main elements of a centrifugal pump. The wear abrasive study was conducted using the ball-cratering method...