The Dependence of Aftereffects and Contact of Rough Surfaces Composite – Metal from Orientation Factors of Dispersed Phase of Polymer Matrix
Journal Title: Фізика і хімія твердого тіла - Year 2016, Vol 17, Issue 2
Abstract
Results of researches of influence orientation effects on the friction properties of carbon-plastics and wear mechanism of unidirectional carbon-plastics have been brought in a work. The optimal structure of carbon-plastics and fiber orientation layers in it relative to the surface friction and sliding direction have been provided. The influence of schemes reinforcing by fibrous carbon materials of polymer composites and schemes contacting of samples composites with the surface of metal counterface on the intensity of wear of friction pair and on the changing of microroughness parameters of metal surface have been researched. It has been shown that the topography of metal counterface surface changes in friction carbon plastics with oriented fibers, but the allocation of heights and curvatures of microroughness peaks of friction surface far removed from the Gaussian allocation and close to Rayleigh allocation.
Authors and Affiliations
H. O. Sirenko, L. M. Soltys
Keywords
Related Articles
- EP ID EP255258
- DOI 10.15330/pcss.17.2.294-305
- Views 70
- Downloads 0
Electrical Properties of Cd Doped InSe Crystals
The measurements of electrical conductivity along (alternating electric field) and across (direct electric field)the crystallographic C axis of Cd‐doped indium selenide single crystals are carried out. The parameters of...
Шляхи підвищення швидкодії GaAs–полових транзисторів Шотткі (ПТШ) та селективнолегованих гетеротранзисторів (СЛГТ) для формування сучасних НВЧ–схем
Немає сумніву, що використання технологій польових транзисторів із зотвором Шотткі на GaAs для формування швидкодіючих ВІС має велику перспективу. Не менші перспективи відкриваються перед унікальною за своїми властивостя...
The Influence of Technological and Tribological Factors on the Aftereffect and Wear Resistance of Polymer Composites
The anti-wear properties of polymer composites based on polytetrafluoroethylene with not metallized and metallized carbon fibers in conditions of friction and wear in over limit and limit of specific loads have been rese...
Formation of Spherulites in Electrodeposited Alloys Fe-Ni and Fe-Cr-Ni
With the use of the methods of scanning electron microscopy and X-ray diffractometry the distinctive features of spherulites creation during electrodeposition of Fe-Ni and Fe-Cr-Ni alloys from sulfate electrolyte on low-...
Investigation of Crystal and Electronic Structures Features of Hf1-xTmxNiSn Semiconductor Solid Solution
The features of structural, energy state and electrokinetic characteristics were investigated for Hf1 xTmxNiSn solid solution in the range: T = 80 - 400 K, x = 0 - 0.40. It was confirmed partly disorder crystal structure...