THE ELECTROLYTIC SYSTEM PROTECTING A TURNING TOOL AGAINST TRIBOLOGIC WEAR
Journal Title: Tribologia - Year 2009, Vol 226, Issue 4
Abstract
To protect the tribologic wear of a turning tool an additional electrolytic circuit with controlled electrochemical processes was applied. The conditions of the work of the controlled electrolytic system with the depositing of the low frictional coating are discussed. The parameters of the work of the electrolytic system were defined in investigations of linear, constant-current voltammetry. The use of the independent electrolytic system allows for the enlargement of the period of the exploitation of the turning tool, for the set of technological synergism coefficients.<br/><br/>
Authors and Affiliations
Mirosław Kosmynina
Keywords
Related Articles
- EP ID EP516774
- DOI -
- Views 34
- Downloads 0
THE EFFECT OF THE DLC LAYER THICKNESS ON THE TRIBOLOGICAL PROPERTIES IN SLIDING FRICTION
This paper presents the results of tribological tests made on the samples with a layer thickness of 50 nm, 500 nm and 1300 nm deposited on the surface of 316L tool steel. The DLC layers were made by the RF PACVD method....
ASSESSMENT OF TRIBOLOGICAL PROPERTIES OF MOTOR OILS
Results of tribological properties of fresh and used commercial oils were presented in this article. Effects for model samples with antiwear additives were compared. We used Four Ball Apparatus (FBA) and MT-1 machine for...
THE INFLUENCE OF THE SURFACE LAYER STRUCTURE IN DISC BRAKE PADS ON THEIR TRIBOLOGICAL PROPERTIES
The article presents the results of the stand tribological investigation and microscopic observations of brake pad materials for automotive disc brakes. The reasons for the scatter of the friction coefficient value are a...
COMPARATIVE ANALYSIS OF ABRASIVE WEAR-RESISTANCE OF BRINAR AND HARDOX STEELS
One of the most important problems encountered during operation of machine parts exposed to abrasive action is their wear. In addition, these parts often work under dynamic loads, so their satisfactory ductility is also...
STUDY ON STABILITY OF THE PROPERTIES OF STABILISED OIL COMPOSITIONS AFTER TESTS OF THE ACCELERATED OXYGENATION
The opinion of the stability of properties of oil compositions after the process of accelerated oxygenation was introduced in the study. The object of investigations was rapeseed oil and oil compositions with the additio...