The temperature modes’ dynamics in the system “primary clarifier - aerotank - secondary clarifier” of Rivne wwtp
Journal Title: Вісник Одеської державної академії будівництва та архітектури - Year 2017, Vol 1, Issue 69
Abstract
Wastewater treatment plants in Ukraine need modernization. Modernization should include the oxidation of organic substances and removal of nitrogen compounds. The temperature regime research was carried out at Rivne municipal wastewater treatment plant in Ukraine for reactors’ design of the oxidation of organic substances and nitrogen compounds. The biological wastewater treatment is performed in aeration tanks of 5 corridor construction. The design wastewater flow rate is 25,000 m3/day. The treated wastewater is discharged into River Ustya. The automated system of environment temperature measurement is developed and tested: clarified wastewater, mixture of wastewater and activated sludge, the activated sludge, treated waste water and the surrounding air. The unit of automatic fixing and data storage consists of the input module (MV110-224.8A), a data collecting module (MSD-200), memory card (MicroSD 8G) and power supply unit (BP30B-D3-24). Experimental data processing allows to choose the design temperature for the nitrification process in case of WWTP modernization and to avoid possible design errors. The temperature change is analyzed through all the profile of wastewater flow sheet of WWTP. Among the main causes of the sharp temperature change of wastewater (∆T> 2 ... 3oC) that comes to the system primary clarifier - aerotank - secondary clarifier of Rivne WWTP is a sharp increase or decrease of wastewater flow rate in the system. The research results allow considering the temperature regimes during the WWTP operation.
Authors and Affiliations
O. O. Hrytsyna
Keywords
Related Articles
- EP ID EP327690
- DOI -
- Views 163
- Downloads 0
Forecasting frost-resistance of the cement stabilized soils by the index of their porosity
Estimating the durability of the cement stabilized soils’ layers of road clothing must have a set of different indicators. One of the most important indicators of the durability of layers of road clothing from the cement...
Modernization of the monument of industrial architecture on the example of the building of the champagne wine factory in Odessa
In October, 1899 the factory of the champagne vine making «Henry Rederer» was opened in Odessa. The project of the factory was developed by the French architect Sharl' Boysh. The area of the overhead basement practically...
Calculation of flat bottom tanks, as shells of rotating rigidity rotation
This article includes actions for definition internal forces and moments of thin-walled circular silo for the storage of particulate solids. Wall sheeting of tower silo loaded symmetrical loads. It is assumed, that norma...
Urban agglomerations: legislative initiative proposition
The article is devoted to the definition of "urban agglomeration" and distinguishing it from close in essence concepts in the light of the urbanization general trend and the creation of new municipal facilities, which ne...
{Methodology of modeling the geodesic dome in Autodesk Revit and transfering models to Lira-Sapr
For active implementation of geodesic domes and shells in design and construction practice, it is necessary to develop a methodology of modeling and integrated using of the geodetic dome model in architectural and struct...