Type Selection of Distributed Charging Piles for Destination Charging Electric Vehicles
Journal Title: 河南科技大学学报（自然科学版） - Year 2018, Vol 39, Issue 2
Abstract
In order to solve the problems of charging queues for electric vehicles and idle distributed charging piles in urban, the type of charging piles were selected. Then, the demand probability of different types of charging facilities was calculated based on the charging mode of user destination, the parking regular pattern of users and charging initial charge state. Under the condition of satisfying the user's charging demand, a type selection optimization model of charging pile was established, which takes the minimum comprehensive cost of charging pile as the objective function. Finally, the proposed model was applied to the planning of electric vehicle charging pile in a university.The results show that the number of 6 kinds of charging piles is determined according to the daily effective working time of 5 different charging piles. The total construction cost is the lowest with 48 180 Yuan, when the daily effective working time of charging piles is 12 h.
Authors and Affiliations
Yunna WU, Fang LI, Chuanbo XU, Chao XIE, Ruhang XU
Keywords
Related Articles
- EP ID EP464807
- DOI -
- Views 71
- Downloads 0
Performance of Hybrid Refrigeration System with an Auxiliary Air-cooled Condenser
In order to solve the problem of the relative low refrigeration efficiency in both of the solar-powered absorption refrigeration and air-cooled electricity-driven compression refrigeration applied in building airconditio...
Ultrasonic Guided Wave Plate-Like Structural Health Monitoring Under Varying Temperature
The ultrasonic guided wave structure health monitoring technique was easy to be affected by temperature interference in the defect diagnosis of plate structure, which affected the accuracy of array damage imaging. In ord...
Asymmetric Arylation Reaction of Pyrazolones
The enantioselective arylation reaction of pyrazolones with quinone monoimines promoted by a chiral phosphoric acid was disclosed.The effects of catalyst, reaction solvent, and temperature on asymmetric arylation reactio...
Influence of Node Domain Size on Plastic Damage Distribution Law of Node in Steel Frames
In order to study the influence of the node domain size on the plastic damage distribution law of the node in the frames, the cross-shaped node of beam and column in the steel frames was selected. The column type ( box,...
Ultrasonic Phased Array Testing and Probability of Detection Quantitative Analysis of Polyethylene Pipe Butt Fusion Joints
The customized polyethylene test block was designed with transverse hole defects at depths of 10 mm, 15 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, whose diameters were 1 mm and 2 mm respectively. Then probability of detectio...