ACCURATE WEIGHING OF MOVING VEHICLES
Journal Title: Metrology and Measurement Systems - Year 2007, Vol 14, Issue 4
Abstract
The paper deals with real-time Multi-Sensor Weigh - In - Motion System (MS-WIM). This system was designed in Poland in a period of 3 years from 2003 to 2006. The embodied system is equipped with 16 piezoelectric load sensors, in the form of narrow 4m long strips, provided by Measurement Specialties. The paper outlines the system structure and its elements i.e. the weighing site, the data acquisition system and data processing software. Experimental tests indicate that the designed MS-WIM system falls in accuracy class B+(7) in the speed range from 30 km/h to 80 km/h.
Authors and Affiliations
P. BURNOS, J. GAJDA, R. SROKA, M. STENCEL, T. ŻEGLEŃ
Keywords
Related Articles
- EP ID EP123834
- DOI -
- Views 63
- Downloads 0
ANALOG DOT RECORDING AS AN EXEMPLARY PROBLEM IN THE AREA OF DYNAMIC MEASUREMENTS<br />
Analog recorders as typical measuring instruments disappear from contemporary equipment due to progress of digital measurements and common possibilities of measurement data storage in a computer memory. However, recorder...
NEW CONCEPT OF A MEASUREMENT PROBE FOR HIGH IMPEDANCE SPECTROSCOPY
The paper presents a new measurement probe working as the input circuit for a high impedance spectroscopy analyzer. The probe allows to measure impedance in the range of 100 Ω < |Zx | < 100 GΩ. The probe extracts t...
RECTIFICATION
Unfortunately, in the issue number 1/2006 Metrology and Measurement Systems in the article: Zygmunt L. Warsza “Two-parameter measurements and signal conditioning in double – current supply four – terminal resistance circ...
MODELS OF BIAS OF MEAN SQUARE VALUE DIGITAL ESTIMATOR FOR SELECTED DETERMINISTIC AND RANDOM SIGNALS
The article presents the probability density functions as well as characteristic functions of selected periodic and random signals. On their basis, original models of the bias of the mean square value digital estimator...
SIMPLE METHOD OF 3D ERROR COMPENSATION OF TRIGGERING PROBES ON COORDINATE MEASURING MACHINE
In this study an automatic, simple algorithm of systematic error corrections of a CMM touch triggering probe is proposed. The whole process does not exceed a standard calibration procedure done on coordinate machine befo...