Construction Of 3phase Sine Waves Using Digital Technique
Journal Title: International Journal of Electronics Communication and Computer Technology - Year 2012, Vol 2, Issue 6
Abstract
Abstract—All the real world parameters such as temperature, pressure etc., are analog in nature, In order to control these physical parameters using computers, which are digital in nature, high speed signal processing board is used. This mainly consists of devices such as analog to digital converter, digital to analog converters and timer which perform the interfacing function between analog and digital are known as data converters. By using Digital methods accuracy and precision of the equipment will be very high compared to analog method of sine wave generation. It provides highly stable and accurate Voltages, Currents and frequency of the 3 phase signals because it is having feedback mechanism. This work consists of DAC 8822[7], 8254 [6] Programmable Timer. This timer is programmed to generate an interrupt of 56?s time period which is fed to IRQ10 pin of PC 104 bus based single board computer [3]. A Device driver is written in Linux which is inserted into the Kernel. Then the processor communicates with 16- bit high speed DAC[7] which outputs the sine samples of 50Hz frequency.
Authors and Affiliations
S. Madhavi| Dept. of Electronics and Communication Engineering, B.V.R.I.T., Hyderabad, India, K. Sujatha| Dept. of Electronics and Communication Engineering B.V.R.I.T. , Hyderabad, India
Keywords
Related Articles
- EP ID EP8321
- DOI -
- Views 407
- Downloads 22
Digitally Programmable Four Phase Quadrature Oscillator in Current Mode
A simple technique is presented to realize a digitally programmable current mode four phase quadrature oscillator using MOCCII. The realized oscillator enjoys the attractive features of digital tuning, low component c...
Wideband Printed Monopole Antenna for WLAN Application
This paper present printed monopole antenna with wideband presented for wireless local loop (WLAN) application. The antenna structure consist of rectangular monopole with microstrip feed line for excitation and conduc...
Text to Speech Conversion with Phonematic Concatenation
This paper presents a method to design a Text to Speech conversion module by the use of Matlab by simple matrix operations. Firstly by the use of microphone some similar sounding words are recorded using a record program...
Design of Data Acquisition System for a Base Transceiver System Room Using ARM Processor
The main aim of this work is to design a system for reducing the wastage of electricity in BTS room and also to handle the scarcity of electricity which causing serious dislocation in all spheres of life. Here we are...
Baysian Imaging Concepts for Smart Fracture Detection in X-Ray Images
X-ray imaging is a traditional method for detecting fracture for ages. This project paves way for enhancement rather than replacement of the existing technology. It is a step towards thinking beyond digitization of X-ray...