Development of the electronic catalog of small energy efficient forms for modern architecture
Journal Title: Вісник Одеської державної академії будівництва та архітектури - Year 2018, Vol 1, Issue 72
Abstract
Advanced energy-efficient architectural solutions are a symbol of modern architecture. They also include small energy-efficient forms (SEEF), which work on alternative energy and are increasingly used in modern energy-saving architecture. The article shows that the SEEF is produced in a large assortment, provides significant energy savings, has a wide range of applications and an attractive appearance. On the Internet, every year the volume of information about the appearance of new SEEF and their use in modern energy-saving architecture is constantly increasing. Currently, the architect for selecting the SEEF in the projected site has to view a large amount of information on different sites. Therefore, it's time to systematize the available information about the SEEF. The article proposed a variant of the systematization of information on the SEEF, which was carried out in two stages: ‒ at the first stage of systematization ‒ the classification of the SEEF for groups of functional use was proposed ‒ for example, some of them: the SEEF group for the improvement of the territory (solar batteries on benches, swings, parking lots, stops, etc.); group SEEF for architectural and landscape lighting (so-called «solar» trees, lanterns, fountains, etc.); group SEEF for the improvement of buildings and structures (solar panels on the roof and on the facades of buildings, wind generators on buildings and structures, paving energy-efficient tiles for the interiors of buildings, etc.); ‒ at the second stage of systematization ‒ the development of the electronic catalog of the SEEF was proposed and its structure was provided ‒ a table with information on the SEEF: classification by functional use groups; general appearance of the product and its name; manufacturer of the SEEF and the purpose of its application; equipping the device with energy-saving and IP-technologies; source of information about the SEEF ‒ e-mail address and Internet access mode. The article suggests one of the possible options for the systematization of this information ‒ the creation of a electronic catalog of the SEEF in modern architecture and recommended its structure: the classification of the SEEF for groups of functional use; general view of the product; name, manufacturer and scope of application; equipping the device with energy-saving and IP-technologies; the source of information about the SEEF ‒ the electronic address and the mode of access to the Internet. The availability of such a replenished electronic catalog of the SEEF with access to the Internet and obtaining of operative information about the product will allow to significantly simplify and improve the work of architects-designers in choosing energy-efficient modern architectural solutions and will significantly improve the energy efficiency and appearance of architectural objects and the environment.
Authors and Affiliations
E. V. , Vitvitskaya, M. P. , Syrbu
Keywords
Related Articles
- EP ID EP510804
- DOI -
- Views 105
- Downloads 0
Research and evaluation of the arch stone bridge structure state after long-term operation
The results of the stone bridge structure investigation after long-term operation are presented. The defects of the bridge structures that reduce their reliability and durability were found. Modern methods of diagnostics...
The heat flux of the evaporator of the thermal-transformer circuit in the improved utilization system of exhaust gases heat
The improved heat recovery system from the exhaust gases of rotary kilns works in a similar way to the previously developed system. After the conventional dust cleaning, the exhaust gases from the rotary kiln are fed int...
Approach to the determination of the technical state of building structures under force and high-temperature influences
The analysis of literary sources and statistical data is carried out. Most of the emergencies arise due to the unsatisfactory technical condition of structures, equipment and engineering networks and their significant de...
calculation of non-homogeneous anisotropic rectangular plates with arbitrary fixation on the contur
For practical applications in engineering are important tables for determining deflections and internal forces of structures. Such tables for the isotropic case under various conditions of plate support on the contour ar...
Buildings deformation state assessment within the limits of densely built-up area under the fixed geological engineering conditions
The article deals with five buildings within the limits of the densely built-up area in the city of Lviv being situated within the limits of this group from 45 to 90 years. From a present-day point of view one of the bui...