Influence of annealing on anisotropic crystalline structure of HDPE cast films
Journal Title: Polyolefins Journal - Year 2016, Vol 3, Issue 1
Abstract
High density polyethylene (HDPE) films were produced using cast film extrusion process with different draw ratios, ranging from 16.9 to 148.8. Morphology, crystallinty and orientation state of crystalline and amorphous phases of the cast films were investigated using scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and polarized Fourier transform infrared spectroscopy (FTIR) analyses, respectively. The anisotropic crystalline structures of row-nucleated lamellar morphology were observed for the films produced with high draw ratios. The crystalline phase axes orientation functions were found to be significantly dependent on the applied draw ratios. As expected, annealing increased the crystallinity and melting point temperature (Tm) of the cast films and on the other hand, it also enhanced the crystalline phase orientation. However, the results revealed that annealing also promoted non-twisted lamellar structures, since it increased fc values (c-axis orientation function) and decreased fa values (a-axis orientation function) simultaneously. Additionally, it was found that the annealing induced enhancement in c-axis orientation function was more significant for the cast films with lower draw ratios, therefore, it was dependent on the draw ratio.
Authors and Affiliations
Ali Yadegari, Jalil Morshedian, Hossein-Ali Khonakdar, Udo Wagenknecht
Keywords
Related Articles
- EP ID EP283165
- DOI 10.22063/POJ.2016.1269
- Views 138
- Downloads 0
Addition of a second alcohol in magnesium ethoxide synthesis as a way to vary the pore architecture of Ziegler-Natta catalysts
In Ziegler-Natta olefin polymerization, the pore architecture of catalysts plays a crucial role in catalytic performances and polymer properties. While the type of preparation routes (such as chemical reaction and soluti...
Discovery and development of metallocene-based polyolefins with special properties
Beside Ziegler-Natta and Phillips catalysts the development of methylaluminoxane (MAO) as cocatalyst in combination with metallocenes or other transition metal complexes for the polymerization of olefins has widely incre...
Estimation of pyrolysis product of LDPE degradation using different process parameters in a stirred reactor
Pyrolysis of low density polyethylene (LDPE) by equilibrium fluid catalytic cracking (FCC) was studied in a stirred reactor under different process parameters. In this work, the effect of process parameters such as degra...
Preparation of high performance PP/ reduced graphene oxide nanocomposites through a combined in situ polymerization and masterbatch method
Despite the great potential of graphene as a nanofiller, achieving homogeneous dispersion remains the key challenge for effectively reinforcing polyolefin (such as polyethylene (PE) and polypropylene (PP)) nanocomposites...
Oxygen-barrier films based on low-density polyethylene/ ethylene vinyl alcohol/ polyethylene-grafted maleic anhydride compatibilizer
In this research, high oxygen-barrier films were organized based on low-density polyethylene (LDPE)/ ethylene vinyl alcohol (EVOH)/ polyethylene-grafted maleic anhydride (LDPE-g-MA) compatibilizer. The effects of 10–30 w...