Influence of the Unconventional Treatment Applied to a Steel on the Corrosion Evolution
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2016, Vol 39, Issue 2
Abstract
The study of an alloyed steel with Cr Mo with an important content of aluminum (0.9…1.2%), unconventionally treated in magnetic field, is attractive because of the durability which increases along with the improvement of the corrosion resistance. Through the thermo-magnetic treatments applied before thermo-chemical treatment, the mechanical properties of this material have been improved. The hardness of the superficial layers has been increased after thermomagnetic and thermo-chemical treatment because of the superficial layers’ characteristics obtained after the unconventional treatment. The behavior of steel in corrosion tests was used as criterion. This paper is a review of personal research and presents the changes of corrosion resistance, using non-conventional treatments and corrosion tests for a Cr Mo alloyed steel, after thermo-magnetic treatment, respectively thermo-chemical treatment. The evolution of the superficial layer for non-conventionally treated steel during the corrosion tests was studied.
Authors and Affiliations
Carmen Penelopi PAPADATU
Keywords
Related Articles
- EP ID EP577247
- DOI -
- Views 81
- Downloads 0
Structural and Tribological Aspects on Ti (C,O,N) Magnetron Reactive Sputtered Thin-Films
Magnetron sputtering is a flexible technique and allows producing a significant amount of types of coatings. Within the frame of present work, Ti-C-O-N thin films were deposited onto high-speed steel (AISI M2), substrate...
Surface Hardening of 40Cr10 Steel after Short Time Nitriding in Fluidized Bed
The paper is based by nitriding in fluidized bed experiments over laboratory plant. Fluidization applications are characterized by high values of mass and heat transfer coefficients. For experiments were used 40Cr10 (Rom...
The Influence of Cold Rolling on the Mechanical Characteristics for Drawing Steels
The paper presents the changes of the mechanical and technological characteristics of steel for deep drawing, cold rolled and recrystallization heat treated. The research was conducted on samples taken from cold rolled s...
Premises in the Design of Computational Algorithms for Refining Slags Applied in Ladle Treatment of Steels. Influence of BOF Slag and of Other Sources of Slag
In the design of computational algorithms for refining slags for ladle treatment of steels, the evaluation of contributions of different factors is a definitory step, allowing to evaluate the real posibilities and limita...
Ibuprofen: Original Versus Green Synthesis
This paper makes a parallel between the original route versus the green route of Ibuprofen (non-steroidal anti-inflammatory drugs most commonly recommended) synthesis. The original route contained six steps with stoichio...