Quality Surface Analysis for Polarized Grid Plasma Nitridings
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2013, Vol 36, Issue 1
Abstract
For the study regarding the effect of the polarized grid a prototype plasma nitriding facility was used. A polarized grid was placed inside the working chamber, into the space between the anode and cathode, a negative polarised grid. The sample used for the tests has a special configuration, provided with three different diameter holes, to highlight the hollow cathode effect on the holes near by sample areas. The chemical analysis for the deposited surface layer was made.
Authors and Affiliations
Mihai AXINTE, Manuela-Cristina PERJU, Carmen NEJNERU, Ion HOPULELE, Iulian CIMPOEŞU
Keywords
Related Articles
- EP ID EP596235
- DOI -
- Views 72
- Downloads 0
Composition of Syngas Produced by Gasification of Agricultural Residue Briquettes
This paper summarizes the results of an experimental study on the gasification of briquettes made from different agricultural residues. There were investigated the effects of operating parameters such as temperature and...
Critical Analysis of “Maximum Stress Failure Criterion” for Composite Materials
The paper deals with critical considerations upon different points of view that were enounced by some authors referring to Maximum Stress Failure Criterion for composite materials. The considerations stem both from a com...
Values of Solutal Marangoni Number in Very Dilute Fe-C-O Solutions at 1873K
Low carbon, aluminum killed steels are well represented by the adequate part of the Fe-C-O system, where are available useful experimental data, regarding the surface tension and viscosity. The reference dynamic characte...
Hydrodynamic Aspects on EAF’s Smelt Metallic Mirror
Using the Physical and Mathematical knowledge, a new approach to EAF bath’s hydrodynamic aspects is proposed to be developed in this paper. Experimental results and a mathematical equation package have been concluded tha...
Research in Industrial Trials to Improve Trough-Thickness Z35 Properties of Hot Rolled Heavy Plates up to 60 mm Thickness for Structural Steels
The main purpose of this industrial experimental rolling, done in ArcelorMittal Galati in the Heavy Plate Mill is to check the correlation between mechanical properties and the microstructure of chemical compositions use...