Rationing signals from eddy current transducer for faithful comparison
Journal Title: Вісник Тернопільського національного технічного університету - Year 2017, Vol 86, Issue 2
Abstract
The problem of detecting metal objects in different environments has always been important. Optimal for dichotomous distinction metals are impulsive VLF metal type. Transmitting antenna of the metal detector emits primary electromagnetic field which adopted the receiving antenna configured to the absence of metal objects between transmitting and receiving antennas at the receiver input signal was minimal. In modern metal detectors identify the type of metal is by providing informative signal to background interfering factor. Now use the amplitude, phase and frequency domain signal processing. Permittivity and magnetic permeability for nonferrous and ferrous metals are different, resulting in different amplitude of the signal at the input of the receiving antenna. Therefore, for correct comparison of signals other than the method of distinguishing threshold required for the normalization of their amplitude. Also investigated environment scanning antenna by hand, and it requires normalization of the received signal in duration. The solution to this problem and is devoted this article
Authors and Affiliations
Anton Abramovych, Volodymyr Piddubnyi
Keywords
Related Articles
- EP ID EP257706
- DOI -
- Views 53
- Downloads 0
Computer modeling of the stresses in welded truss
The stresses localization in the construction elements of welded roof truss that is 18000x3600 mm and is made of 100х100х10 mm steel rolled L-bar is studied. The nodes are designed without adapters. Computer modeling of...
The initial approximation for iterative solution of the problem of propagation of small elastic disturbances in 3-D stress field
The present stress-strain state in the structural elements, geological systems, biological structures, etc. influences essentially their operation properties, reliability and durability. Acoustic method, the basis of int...
Improvement of the measurement accuracy of the support-rotary platform of the antenna system using mems accelerometers
The article is devoted to the research of errors arising from the influence of non-linear characteristics of MEMS gyroscopes, which appear at high angles deviation plane of the crystal sensor from horizontal surface, and...
Interaction of abrasive working environment particles at vibrating processing with the treated surface details
The paper carries out the review of the vibration processing, the analysis of the interaction of the granule with the element, the energy level of working environment, and ways of their increasing. Basic parameters are d...
Pressing of the preliminary-stressed plate by two co-axial punches of complex configuration
Solution of the contact task on the interrelation of the ring-parabolic and parabolic punch with the preliminary-stressed plate has been presented in the article. Development of analytical solutions for the plate is perf...