Redesigning a Jaw Crusher Using Value Analysis, Part I
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2009, Vol 32, Issue 1
Abstract
Value Analysis (VA) is a method that provides an operating technique using a creative and organized approach. It is managed by a group, each of them selected according their expertise in specific subjects and coordinated by a Value Analysis expert. The paper presents a complete study of VALUE ANALYSIS applied concretely to a selected piece of equipment. The phases and ITERATIVE operation of the Value Analysis method are presented. Value Analysis combines both ENGINEERING and ECONOMICS without, however, placing neither ENGINEERING or ECONOMICS first. They both are similarly important, as it can be concluded at the end of this paper.
Authors and Affiliations
Florin CHICHERNEA, Alexandru CHICHERNEA
Influence of Cooling Oil on the Surface Quality of the Rolled Strip
The excess of emulsion used in the lamination process leads to the formation of drops which in the annealing process forms spots of burned emulsion. It was also shown to cause formation areas with high carbon concentrati...
Time Analysis of King Matthias the Ist Sculptural Group
The paper presents a study on the degradation of the King Matthias I sculptural group caused by environment factors and influenced by the casting technology and by the assembling method. During this study, samples from i...
Influence of the Chemical Composition on the Behavior of Austenitic Stainless Steel in Fluid Layer Nitriding Process
The main factors that influence the stainless steel behavior to the nitriding process are: chemical composition, nitriding temperature, treatment time. Researches have revealed that, with low temperature nitriding, the c...
Glow Discharge Optical Emission Spectrometry (GDOES), an Effectiveness Method for Characterizing Composition of Surfaces and Coatings
Within the frame of this work, the technical procedures and real advantages of using Glow Discharge Optical Emission Spectroscopy (GDOES) for establishing depth concentration profiles of surfaces are presented. GDOES can...
Morphological Aspects of Thermosetting Polymers/Zn Composite Coatings
The present work has the purpose of studying the morphological aspects of composite coatings having zinc matrix and thermosetting polymers (PF resin type NOVOLAC - RESITAL 6358/1 and epoxy resin type DINOX 110L) as dispe...