Research of metal of the dies for punching and cutting deposited by tungstenfree high speed steel type (fcadw-ss 100h4m5f2 (zr)
Journal Title: Вісник Тернопільського національного технічного університету - Year 2016, Vol 82, Issue 2
Abstract
An economic technological mode of dies production according to the scheme: mold surfacing - annealing - mechanical processing - quenching – tempering. The results of research of applying of self-shielding flux-cored wire type (FCADW-SS 100H4M5F2 (Zr)) for punching and trimming dies tool. Punches that surfaced by self-shielding flux-cored wire (FCADW-SS 100H4M5F2 (Zr)) have the hardness within 62-63 HRC after quenching and tempering. Wear resistance of the deposited stamping tool exceeds by 3,5-4 times than the resistance of tool of У8А (U8A) steel and by 1,5-2 times than the resistance of punches of I2XM (12HM) or 9ХМ (9HM) steels, that have the hardness 58 HRC. Established that the flux-cored wire (FCADW-SS 100H4M5F2 (Zr)) allows to ensures high technical and economic impact and achieve economies of expensive high alloying tungsten and tungsten-molybdenum high-speed steels.
Authors and Affiliations
Valeriy Chyhariov, Nataliya Oleksiivna Makarenko, Denys Golub, Oleksandr Bohutskyy
Keywords
Related Articles
- EP ID EP257928
- DOI -
- Views 52
- Downloads 0
Synthesis of digital radio receiver system for secure communication with frequency-hopping spread spectrum
It was represented the results of synthesis and modeling of work of digital receiver based on the digital down converter (DDC), and a digital signal processor (DSP), which are used to process received signals. The method...
Cyber-physical model of the immunosensor system in a rectangular lattice with the use of lattice difference equations of population dynamics
The article developed a cyber-physical model for immunosensory systems. The main attention is paid to the mathematical description of the discrete dynamics of populations in combination with dynamic logic, which is used...
Theoretical analysis of thermal conditions and ways of led temperature stabilization
Thermoelectric model of a light diode was built with a spacial separation of the heat and cold source. The differential equations system was solved, which comprises the stationary equation of the heat-conductivity and th...
Hydrogen wear resistance under the metal-polymer friction pairs operation
The results of studies of labyrinth seals made of composite materials on the basis of aromatic polyamide phenylon reinforced by copper-carbon fiber are presented. It is shown that in this case a selective transfer with f...
The flow of concentrated force through open elastic rod to the contour of the curved hole in infinite plate
The new approach to the problem of the flow to the contour of the curved hole in an infinite isotropic plate of concentrated force, applied to the end of reinforcing open elastic bar of constant rectangle cross section,...