Siderurgy Slags Recovery in Building Industry
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2014, Vol 37, Issue 1
Abstract
During the metallurgical processes of iron and steel elaboration, besides the basic products, it results a serious of secondary products (wastes) in high quantities but with a high recycle – recovery potential, and their reintroduction in the economic circuits. In this paper, we are going to refer strictly to the working and the recovery of the blast furnace slags, respectively to LD converter slags, without insisting on the formation mechanism and slag reactions.
Authors and Affiliations
Marian BORDEI, Liviu ENACACHE, Ștefan DRAGOMIR
Keywords
Related Articles
- EP ID EP590596
- DOI -
- Views 83
- Downloads 0
Ecotechnologies – A Major Route for DurableSustainable Development in the Metal Materials Industry
The paper shows that the durable and sustainable development depends on the quality of the events occurring in the convergence area between the natural ecological system (N.E.S.) and the technological system (T.S.) repre...
Influence of Cooling Oil on the Surface Quality of the Rolled Strip
The excess of emulsion used in the lamination process leads to the formation of drops which in the annealing process forms spots of burned emulsion. It was also shown to cause formation areas with high carbon concentrati...
Study on the Influence of the Chemical Composition in the Thermomechanical Processing of the Steel Products
This paper presents the results of industrial scale researches on the influence of the chemical composition on the characteristics of high yield point plates of wieldable fine grain steels. The comparative study of the m...
Hardening of the Grey Cast Iron through the Vibrating Electrode Method Using a WC Electrode and in Combination with TiC and Ti Electrode
There have been tested samples of grey cast iron, the hardening being made through WC coating through the vibrating electrode method with a layer, two layers and through double layers combined with Ti and TiC. Besides do...
Material Balance in a Blast Furnace, when Replacing Coke with Coal Dust
The paper presents the technology for the preparation and burning of coal dust in the blast furnace, as well as the material balance, - without and with the in - of coal dust. On the basis of the comparative analysis, me...