The Effect of Annealing Time on the Synthesis of Boron Nitride Nano Tubes by High Energy Ball Grinding and Annealing Method
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2013, Vol 1, Issue 1
Abstract
In this study, Boron Nitride Nanotubes (BNNTs) were synthesized using a ball-milling and annealing method. Starting powder was used as the amorphous boron powder and in a planetary ball mill (FritschPulverisette 7 Premium Line) was ball milled for 2 hours under nitrogen atmosphere. After milling process, obtained powders were annealed under NH3+N2 flow at 1300ᴼC for different time as 2,4,6 hrs in tube furnace. Consequently, the boron nitride nanotubes were produced by using this technique. Synthesized tubes were determined by using X-ray diffraction analysis (XRD), high-resolution transmission electron microscopy (HR-TEM)
Authors and Affiliations
Seval Hale Güler, Mustafa Aksoy
Keywords
Related Articles
- EP ID EP464224
- DOI -
- Views 115
- Downloads 0
Processing of 5083 Al-Mg Material with Rolling (Galetage), Investigation of the Effects of Rolling Parameters on Surface Roughness and Surface Hardness
Burnishing process is a post-processing operation used to obtain good surface quality. Burnishing process has some advantages such as increase of surface hardness and decrease of surface roughness on the surface work pie...
The Impact of Acoustic Parameters on the Classification of Firearms Using Gunshots
Acoustic analysis is mainly used in material science and human voice. In recent years, many areas such as sound perception, gun and shooter detection, unmanned aerial vehicles have been used in the defense industry. Acti...
Investigation of Single Bolted Connections of Thin Wall U Steel Profiles with Eccentric Behaviour
There is no Turkish standard for bolted connections of thin walled steel elements. In the calculations made according to Eurocode and AISI standards, there are different approaches and behaviours for the same sample. The...
Determination of Optimum Cutting Parameters Affecting the Surface Form Properties in the Ductile Stainless Steels with Gray Relational Analysis Method
In this study, the effects of cutting parameters with different coatings (TiAlN and TiN) on drilling performance were investigated. Drilling operations were carried out on duplex stainless steels by drilling holes 20 mm...
Digital PID Temperature Controlled Laminator Test Kit Design and Production for Small & Medium Scale Photovoltaic Module Production
In this study, laminator design and production are realized for small & medium scale photovoltaic (PV) module production. The reliability of the energy to be supplied by the PV modules and / or the system is possible by...