THE INFLUENCE OF THE MICROSTRUCTURE OF A CHROMOSILICONIZED LAYER ON THE TRIBOCORROSIVE PROPERTIES EXPOSED TO MINE WATER
Journal Title: Tribologia - Year 2017, Vol 271, Issue 1
Abstract
This paper presents the results of a study analysing the influence of the microstructure of a chromosiliconized layer produced using C90U steel on the tribocorrosive properties exposed to mine water. The steel coating process was conducted at a temperature of 1000°C for 8 hours. The layer was prepared by the powderpack method with the use of powdered ferrochrome with SiC, kaolin powder, and ammonium chloride as the activator. Samples of C90U steel were placed in the powder mixture inside specially designed boxes of X6CrNiTi18-10 steel and were heated in a laboratory furnace. The boxes were closed and sealed hermetically with enamel to prevent charge oxidation. The microstructure, chemical and phase composition of the chromosiliconized layer were analysed. Thickness, porosity, and hardness were measured. The wear of the chromosiliconized layer resulting from exposure to a corrosive environment of model mine water was analysed. A tribocorrosion test was conducted with the use of a wear tester composed of three rollers and a cone. The chromosiliconized layer produced by the powder-pack method on C90U steel contributed to an increase in the hardness of friction systems exposed to a corrosive medium in comparison with uncoated steel.
Authors and Affiliations
Iwona BAUER
Keywords
Related Articles
- EP ID EP240540
- DOI -
- Views 73
- Downloads 0
CHARAKTERYSTYKA NOWEGO STANOWISKA ORAZ METODYKA PULSACYJNEGO BADANIA WYTRZYMAŁOŚCI ZMĘCZENIOWEJ ZĘBÓW KÓŁ ZĘBATYCH NA ZŁAMANIE
Złamanie zęba u podstawy jest najbardziej niebezpieczną formą zużycia kół zębatych wykluczającą je z dalszej eksploatacji. W celu przeciwdziałania wystąpieniu tego rodzaju uszkodzenia bardzo istotne jest właściwe zaproje...
FRICTION RESISTANCE IN SLIDE/ROLL MOTION FOR CHOSEN POLYMERS AGAINST STEEL
The paper describes the study of polymer-steel sliding pairs during slip-roll motion. The analysis focused on the frictional forces at various rolling to slip ratios. The kinematic parameters of the friction node were th...
TRIBOLOGICAL PROPERTIES OF N-ALCOHOLS, N-ALKYLPHENYLS AND GLYCOLS ALKOXY DITHIOPHOSPHATES IN FRICTION CONTACTS: STEEL–STEEL, AL2O3–AL2O3 AND STEEL–AL2O3
The zinc di-n-alkyko(arylo)ethoxyditiophosphates, a new class of organodithio- phosphorous compounds(ZEDPs) with low phosphorous, low ash contents and high thermal stability have been prepared, they are very good AW/EP a...
A STUDY OF THE RHEOLOGICAL PROPERTIES OF GREASES THICKENED BY LITHIUM 12-HYDROXYSTEARATE IN THE LINEAR AND NON-LINEAR VISCOELASTIC REGIME
The effect of lithium thickener content on rheological properties of grease compounds in linear and non-linear viscoelastic regimes was investigated in this work. During the study, two oscillation tests were used: amplit...
Badania wpływu obróbki nagniataniem na własności sprężysto-plastyczne żeliwa sferoidalnego ferrytycznego
W pracy przedstawiono wyniki badań własności sprężysto-plastycznych warunkowane siłą nagniatania krążkowaniem naporowym żeliwa EN-GJSF-HB205. Przeprowadzone badania [L. 4] wykazały, że siła nagniatania kształtując stan...