THE POSSIBILITIES OF FRICTION FORCE STEERING USING ELECTRIC CURRENT IN FRICTION ZONE
Journal Title: Tribologia - Year 2011, Vol 236, Issue 2
Abstract
This paper presents a new possibility of using electric current for friction force steering. Typical friction changes of several parameters depending on unit pressure are also presented. Taking into account the conditions of existing weak and strong triboelectrical phenomenon, the possibility of impact electric current on friction force changes is included. The largest changes of friction force take place when an external source of electric energy coexists in the friction zone and the triboelectrical phenomena have the dominant character.<br/><br/>
Authors and Affiliations
Krzysztof Krawczyk, Emil Nowiński, Agnieszka Chojnacka
Keywords
Related Articles
- EP ID EP271779
- DOI -
- Views 47
- Downloads 0
AN INFLUENCE OF MOLYBDENUM DISULFIDE CONTENT IN ELECTROLYTE ON TRIBOLOGICAL PROPERTIES OF ANODIC OXIDE COATINGS
The paper presents an estimation of the usefulness modification of anodic oxide coatings (AHC) on aluminium alloys with molybdenum disulfide (MoS2) for the improvement of the tribological properties of Al2O3 coatings. An...
THE EFFECT OF CONSTRAINT CONDITIONS ON THE CONTACT PRESSURE DISTRIBUTION OF MULTI-DISC FRICTION CLUTCHES
High thermal stresses generated between the contact surfaces in a clutch system, e.g., multi-disc friction clutch (back plate, clutch discs, separators, and piston), due to the friction heat generated during the slipping...
THE PROCESS OF FORMATION OF THE ADHESIVE CAVITIES UNDER OSCILLATORY MOTION
During the direct contact of metal-to-metal, complex tribological wear processes occur. One of the most important and the most problematic phenomena leading to irreversible changes in the geometric structure of the surfa...
Modelling the trochoidal gearing with respect to the uniform teeth wear
W referacie przedstawiono model teoretyczny zmodyfikowanego zazębienia trochoidalnego, które jest stosowane w pompach systemu Gerotor. Pompy Gerotor należą do maszyn wirujących, których kinematyka oparta jest na zasadzie...
OCENA ODPORNOŚCI NA ZUŻYCIE I KOROZJĘ ZŁĄCZY WYKONANYCH POMIĘDZY TYTANEM A STALĄ NIERDZEWNĄ ZA POŚREDNICTWEM Al, Cu ORAZ Ni
W niniejszej pracy połączono czysty tytan (Grade 2) ze stalą nierdzewną (X5CrNi18-10) poprzez spajanie dyfuzyjne z użyciem międzywarstw z aluminium, miedzi oraz niklu (100 μm). Badanie koncentruje się na porównaniu odpor...