EFFECT OF THE ANGLE OF IMPACT OF AN ABRASIVE SOIL MASS ON STEEL WEAR INTENSITY
Journal Title: Tribologia - Year 2018, Vol 279, Issue 3
Abstract
This article presents a study into the effect of the rake angle of the working surface of a specimen made of Hardox Extreme steel on abrasive wear intensity. The study was conducted using the “rotating bowl” method in two types of an abrasive soil mass at three specimen rake angles of 0˚, 12˚, and 17˚. No significant differences in the wear intensity were observed for a heavy abrasive soil mass, while for a light abrasive soil mass, an increase in the wear intensity was observed with an increase in the rake angle, with the greatest increase in the wear intensity occurring after a change in the rake angle from 0˚ to 12˚. Increasing the rake angle from 12˚ to 17˚ resulted in no significant change in the wear intensity. In the light abrasive soil mass, non-zero specimen rake angles increased the dynamic impact of loose abrasive wheels. The appearance of the surface of specimens subjected to abrasion under these conditions indicated a high proportion of erosive wear accompanying the scratching and ridging wear.<br/><br/>
Authors and Affiliations
Jerzy NAPIÓRKOWSKI, Krzysztof LIGIER
Keywords
Related Articles
- EP ID EP403198
- DOI 10.5604/01.3001.0012.7017
- Views 47
- Downloads 0
Uszkodzenia bieżni łożysk wieńcowych
W artykule przedstawiono niektóre postacie uszkodzeń bieżni łożysk wieńcowych i wskazano ich przyczyny. Szczególną uwagę zwrócono na bieżnie łożysk kulkowych jednorzędowych o styku czteropunktowym. Analizie poddano zmian...
THE EFFECT OF FILLER CONCENTRATION IN GREASE ON THE EFFICIENCY OF THE LUBRICATION OF STEEL SLIDING PAIRS WORKING IN MIXED LUBRICATION
The paper presents the results of preliminary studies into the effect of different fillers (Bi2O3, Sb2O3, CuO, ZnO, TiO2) in calcium grease (Machine Grease 2) on the efficiency of the lubrication of steel sliding pairs....
EVALUATION OF LUBRICATING PROPERTIES OF SELECTED LUBRICANTS USED IN EXPLOITATION OF CRANE
W publikacji przedstawiono wyniki badań własności smarnych olejów handlowych silnikowego 10W40 Turbo Diesel oraz hydraulicznego Hydrol L-HL 46 oraz te same oleje handlowe modyfikowane 5% stężeniem objętościowym preparate...
ANALYSIS OF TRIBOLOGICAL PROPERTIES OF SELECTED PTFE-BASED POLYMER COMPOSITES IN A SLIDING INTERACTION WITH ALUMINIUM OXIDE (Al2O3)
The paper presents the microstructure and mechanical and tribological properties of polymer composites based on polytetrafluoroethylene (PTFE) intended for use in friction couples where reciprocating motion is performed,...
A STUDY OF THE RHEOLOGICAL PROPERTIES OF GREASES THICKENED BY LITHIUM 12-HYDROXYSTEARATE IN THE LINEAR AND NON-LINEAR VISCOELASTIC REGIME
The effect of lithium thickener content on rheological properties of grease compounds in linear and non-linear viscoelastic regimes was investigated in this work. During the study, two oscillation tests were used: amplit...